A multi-phase slag containing Na2O is potential to efficiently dephosphorize high-P hot metal.After dephosphorization,the generated slag with high P2O5 content is regarded as a P resource.Because P2O5 was mainly conce...A multi-phase slag containing Na2O is potential to efficiently dephosphorize high-P hot metal.After dephosphorization,the generated slag with high P2O5 content is regarded as a P resource.Because P2O5 was mainly concentrated in the 2CaO SiO2-3CaO P2O5 solid solution,the recovery of P from dephosphorization slag primarily depends on the separation of the solid solution from other phases.The distribution ratios of P2O5 between solid solution and liquid phase in the CaOSiO2-FeO-P2O5-Nslag system were investigated.The results indicated that the addition of Na2O facilitated the enrichment of P2O5 in the solid solution because it increased not only the distribution ratio of P2O5 but also the mass fraction of the solid solution.The distribution ratio of P2O5 was independent of the P2O5 content in slag.A higher P2O5 content in slag resulted in higher P2O5 and Na2O contents in the solid solution.The distribution ratio of P2O5 increased with the total Fe content in the liquid phase,regardless of the valence of Fe.An increase in the FeO content in slag brought a higher P2O5 content in the solid solution.As slag basicity increased,the distribution ratio of P2O5 increased,but the P2O5 content in the solid solution decreased.展开更多
The enrichment behavior of phosphorus in CaO-SiO2-FeOx-P2O5 slag was studied by making an investigation on the distribution of phosphorous content in the CaO-SiO2-FeOx-P2O5 molten slag.The research results showed that...The enrichment behavior of phosphorus in CaO-SiO2-FeOx-P2O5 slag was studied by making an investigation on the distribution of phosphorous content in the CaO-SiO2-FeOx-P2O5 molten slag.The research results showed that the 2CaO·SiO2 solid particles existing in molten slag were the condensation sites for the phosphorus enrichment.The enrichment process of phosphorus in the molten slag can be recognized as three substeps:mass transfer of phosphorus from bulk slag to the surface of 2CaO·SiO2 particle,superficial solid solution reaction of phosphorus around the 2CaO·SiO2 particle,and diffusion of phosphorus through the product layer of 2CaO·SiO2-3CaO·P2O5 solid solution to the inner of 2CaO·SiO2 particle.Moreover,higher temperature is favorable to the phosphorous enrichment from molten bulk slag to the 2CaO·SiO2 particles.展开更多
The CaO-doped Cu/(NiFe2O4-10NiO) cermet inert anodes were prepared by the cold isostatie pressing-sintering process, and their corrosion resistance to Na3AlF6-K3AlF6-Al203 melt was studied. The results show that the...The CaO-doped Cu/(NiFe2O4-10NiO) cermet inert anodes were prepared by the cold isostatie pressing-sintering process, and their corrosion resistance to Na3AlF6-K3AlF6-Al203 melt was studied. The results show that the relative density of 5Cu/(NiFe2O4-10NiO) cermet sintered at 1 200 ℃ increases from 82.83% to 97.63% when 2% CaO (mass fraction) is added. During the electrolysis, the relative density of cermet inert anode descends owing to the chemical dissolution of additive CaO at ceramic grain boundary, which accelerates the penetration of electrolyte. Thus, the corrosion resistance to melts of Cu/(NiFe2O4-10NiO) cermet inert anode is reduced. To improve the corrosion resistance of the cermet inert anode, the content of CaO doped should be decreased and the technology of cleaning the ceramic grain boundary should be applied.展开更多
基金This work was financially supported by the National Natural Science Foundation of China(Nos.51704010,51604003,U1760117)Key Laboratory Open Project Fund of Metallurgical Emission Reduction and Resources Recycling(Anhui University of Technology)Ministry of Education(JKF18-02).
摘要A multi-phase slag containing Na2O is potential to efficiently dephosphorize high-P hot metal.After dephosphorization,the generated slag with high P2O5 content is regarded as a P resource.Because P2O5 was mainly concentrated in the 2CaO SiO2-3CaO P2O5 solid solution,the recovery of P from dephosphorization slag primarily depends on the separation of the solid solution from other phases.The distribution ratios of P2O5 between solid solution and liquid phase in the CaOSiO2-FeO-P2O5-Nslag system were investigated.The results indicated that the addition of Na2O facilitated the enrichment of P2O5 in the solid solution because it increased not only the distribution ratio of P2O5 but also the mass fraction of the solid solution.The distribution ratio of P2O5 was independent of the P2O5 content in slag.A higher P2O5 content in slag resulted in higher P2O5 and Na2O contents in the solid solution.The distribution ratio of P2O5 increased with the total Fe content in the liquid phase,regardless of the valence of Fe.An increase in the FeO content in slag brought a higher P2O5 content in the solid solution.As slag basicity increased,the distribution ratio of P2O5 increased,but the P2O5 content in the solid solution decreased.
基金Item Sponsored by National Natural Science Foundation of China/Joint Fund for Iron and Steel Research(50874130)National Natural Science Foundation of China(50974034)
摘要The enrichment behavior of phosphorus in CaO-SiO2-FeOx-P2O5 slag was studied by making an investigation on the distribution of phosphorous content in the CaO-SiO2-FeOx-P2O5 molten slag.The research results showed that the 2CaO·SiO2 solid particles existing in molten slag were the condensation sites for the phosphorus enrichment.The enrichment process of phosphorus in the molten slag can be recognized as three substeps:mass transfer of phosphorus from bulk slag to the surface of 2CaO·SiO2 particle,superficial solid solution reaction of phosphorus around the 2CaO·SiO2 particle,and diffusion of phosphorus through the product layer of 2CaO·SiO2-3CaO·P2O5 solid solution to the inner of 2CaO·SiO2 particle.Moreover,higher temperature is favorable to the phosphorous enrichment from molten bulk slag to the 2CaO·SiO2 particles.
基金Project(2005CB623703) supported by the Major State Basic Research and Development Program of ChinaProject(2008AA030503) supported by Hi-Tech Research and Development Program of China
摘要The CaO-doped Cu/(NiFe2O4-10NiO) cermet inert anodes were prepared by the cold isostatie pressing-sintering process, and their corrosion resistance to Na3AlF6-K3AlF6-Al203 melt was studied. The results show that the relative density of 5Cu/(NiFe2O4-10NiO) cermet sintered at 1 200 ℃ increases from 82.83% to 97.63% when 2% CaO (mass fraction) is added. During the electrolysis, the relative density of cermet inert anode descends owing to the chemical dissolution of additive CaO at ceramic grain boundary, which accelerates the penetration of electrolyte. Thus, the corrosion resistance to melts of Cu/(NiFe2O4-10NiO) cermet inert anode is reduced. To improve the corrosion resistance of the cermet inert anode, the content of CaO doped should be decreased and the technology of cleaning the ceramic grain boundary should be applied.