期刊文献+
任意字段
题名或关键词
题名
关键词
摘要
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息
共找到7,288篇文章
< 1 2 … 250 >
每页显示 20 50 100
已选0条
引用分析
参考文献
引证文献
 统计分析
检索结果
已选文献
显示方式：
石墨烯对光固化Al2O3陶瓷力学性能的影响 认领 引用
1
作者 刘耀 余庆轩 +3 位作者 王中原 文蓉江 李澜波 占丽娜 《热加工工艺》 CAS 北大核心 2026年第13期75-82,共8页
针对光固化Al2O3陶瓷在脱脂烧结后易形成孔洞、力学性能差的问题,系统研究了石墨烯添加对陶瓷浆料流变性、沉降性、固化行为及烧结体力学性能的影响。采用γ-缩水甘油醚氧丙基三甲氧基硅烷(KH560)对Al2O3粉体进行表面改性,并加入不同含... 针对光固化Al2O3陶瓷在脱脂烧结后易形成孔洞、力学性能差的问题,系统研究了石墨烯添加对陶瓷浆料流变性、沉降性、固化行为及烧结体力学性能的影响。采用γ-缩水甘油醚氧丙基三甲氧基硅烷(KH560)对Al2O3粉体进行表面改性,并加入不同含量的石墨烯,制备高固相、低粘度的光固化浆料。通过傅里叶红外光谱、旋转流变仪、沉降试验及Beer-Lambert模型分析,优化了浆料配方与光固化工艺参数。结果表明:当KH560含量为2.5wt%、石墨烯含量为0.01wt%时,浆料粘度最低、沉降分层最少;在曝光时间4 s条件下,添加0.01wt%石墨烯的浆料透射深度为382μm,临界曝光能量为44.3 m J/cm2。经1750℃烧结后,陶瓷零件致密度达99.7%,弯曲强度为27.61 MPa,维氏硬度为13.45GPa。石墨烯通过位阻效应及裂纹偏转机制有效促进了烧结致密化并改善了力学性能。本研究为光固化增材制造高致密、高性能氧化铝陶瓷提供了试验依据。 展开更多
关键词 石墨烯 光固化 Al2O3陶瓷 浆料 流变性能
暂未订购 下载PDF
釉中SiO2和Al2O3含量对青花瓷“晕散”的影响研究 认领 引用
2
作者 李小龙 胡其国 +2 位作者 赵田贵 董伟霞 包启富 《中国陶瓷》 CAS CSCD 北大核心 2026年第7期79-88,共10页
青花瓷作为中国传统文化的瑰宝,在制备烧造过程中,因青花色料、釉料配方组成以及制备工艺的影响,易造成青花装饰出现发色不均匀、线条或者块面在不同朝代或者是同一朝代有不同程度的“晕散”。实验采用场发射扫描电镜(FE-SEM)、傅里叶光... 青花瓷作为中国传统文化的瑰宝,在制备烧造过程中,因青花色料、釉料配方组成以及制备工艺的影响,易造成青花装饰出现发色不均匀、线条或者块面在不同朝代或者是同一朝代有不同程度的“晕散”。实验采用场发射扫描电镜(FE-SEM)、傅里叶光谱(FTIR)、电子探针(EPMA)、光学显微镜(OM)等设备分析青花瓷釉中SiO2和Al2O3含量对青花装饰晕散距离、微观结构、釉层网络结构以及釉中Co2+浓度的影响,结合理论计算阐明了青花瓷“晕散”与釉料黏度之间的关系。实验结果表明,随着釉中SiO2和Al2O3含量的增加,釉层网络结构中Si—O—Si键数量增多并且增强,釉层黏度增大;黏流活化能拟合结果表明,黏流活化能增大,原子间作用力越强,Co2+在釉中扩散越困难,青花瓷线条的“晕散”距离从250μm减小到10μm。本研究有助于从物理化学角度理解青花“晕散”机制,为青花装饰工艺的优化提供科学依据。 展开更多
关键词 青花瓷 SiO2 Al 2O3 晕散 黏流活化能
暂未订购 下载PDF
退火对原子层沉积W/Al2O3纳米薄膜形貌与电学性能的影响 认领 引用
3
作者 高管哗 王国政 +1 位作者 蒋恩桐 王天昊 《物理化学进展》 2026年第2期110-121,共12页
在氮气气氛下对原子层沉积法制备的W/Al2O3薄膜进行了退火处理,利用高阻测试仪、扫描电子显微镜及能量色散X射线谱对薄膜进行表征,研究了退火对薄膜电学性能及形貌的影响。结果表明,在1 h退火时间下,400℃~600℃退火不仅使薄膜方块电阻... 在氮气气氛下对原子层沉积法制备的W/Al2O3薄膜进行了退火处理,利用高阻测试仪、扫描电子显微镜及能量色散X射线谱对薄膜进行表征,研究了退火对薄膜电学性能及形貌的影响。结果表明,在1 h退火时间下,400℃~600℃退火不仅使薄膜方块电阻数值明显降低,而且随退火温度升高呈持续下降趋势,当退火温度上升至700℃~800℃时,方块电阻偏离下降趋势,出现了明显上升趋势;当退火时间延长至2 h时,薄膜在400℃~500℃条件下仍保持下降趋势,但在600℃条件下方块电阻出现明显跃升。SEM与EDS结果表明,电学异常与薄膜表面连续性下降密切相关。 展开更多
关键词 原子层沉积 W/Al2O3纳米薄膜 退火 方块电阻 表面形貌
暂未订购 下载PDF
Tb3+离子掺杂的Al2O3基发光材料的微波水热合成与性能 认领 引用
4
作者 程文俊 刘静 张俊计 《纳米技术》 2026年第2期17-25,共9页
以Al(NO3)3·9H2O和尿素为原料,采用微波水热–焙烧法制备了稀土离子Tb3+掺杂的Al2O3基发光材料。利用X-射线衍射仪(XRD)、扫描电子显微镜(SEM)、同步热分析仪(TG-DSC)、荧光光谱仪(FS)和Chromaticity Diagram等对产物的结构、形貌... 以Al(NO3)3·9H2O和尿素为原料,采用微波水热–焙烧法制备了稀土离子Tb3+掺杂的Al2O3基发光材料。利用X-射线衍射仪(XRD)、扫描电子显微镜(SEM)、同步热分析仪(TG-DSC)、荧光光谱仪(FS)和Chromaticity Diagram等对产物的结构、形貌、发光性能和CIE色度进行分析和表征。结果表明,在180℃下微波水热30 min,可制备出结晶良好的叶片状勃姆石。勃姆石经不同温度的焙烧,由γ-Al2O3向δ-Al2O3转变,焙烧后的样品形貌基本保留前驱体的形貌。掺杂Al2O3基发光材料的发光来自Tb3+的5D4→7Fj (j = 3, 4, 5, 6)能级跃迁发射,发光强度随焙烧温度的提高趋于增强,CIE色度随焙烧温度变化不明显,呈绿色。 展开更多
关键词 微波水热法 Al2O3基质 发光性能
暂未订购 下载PDF
纳米Al2O3增强铝基复合材料制备技术及力学性能研究进展 认领 引用 被引量：4
5
作者 荣智峥 魏午 +4 位作者 赵宇 毕舰镭 高阳 黄晖 聂祚仁 《材料工程》 EI CAS CSCD 北大核心 2025年第5期130-144,共15页
纳米Al2O3/Al复合材料作为轻质高性能结构材料,可实现轻量化节能减排,在航空航天、汽车工业、船舶制造、国防及5G电子通讯等领域具有广阔的应用前景。本文主要介绍高能球磨粉末冶金法、超声辅助铸造法、搅拌摩擦法、增材制造法、... 纳米Al2O3/Al复合材料作为轻质高性能结构材料,可实现轻量化节能减排,在航空航天、汽车工业、船舶制造、国防及5G电子通讯等领域具有广阔的应用前景。本文主要介绍高能球磨粉末冶金法、超声辅助铸造法、搅拌摩擦法、增材制造法、原位反应法等国内外纳米Al2O3/Al复合材料制备技术。总结分析纳米Al2O3增强体、增强体与铝基体的界面微结构、增强体的尺寸和含量、铝基体的晶粒尺寸、增强体的分散性和微观构型设计对纳米Al2O3/Al复合材料力学性能的影响。概述了纳米Al2O3/Al复合材料中主要的强化机制。最后,展望了纳米Al2O3/Al复合材料未来在高增强体体积分数的大尺寸制备技术、非均质构型优化以及高强耐热结构功能一体化等方面的发展方向。 展开更多
关键词 纳米Al2O3 铝基复合材料 制备方法 力学性能 强化机制
暂未订购 下载PDF
Al2O3coated polyimide porous films enable thin yet strong polymer-in-salt solid-state electrolytes for dendrite-free lithium metal batteries 认领 引用
6
作者 Haotian Zhang Shengfa Feng +6 位作者 Mufan Cao Xiong Xiong Liu Pengcheng Yuan Yaping Wang Min Gao Long Pan Zhengming Sun 《Chinese Chemical Letters》 SCIE CAS CSCD 2025年第8期492-497,共6页
The ineluctable introduction of lithium salt to polymer solid-state electrolytes incurs a compromise between strength,ionic conductivity,and thickness.Here,we propose Al2O3-coated polyimide(AO/PI)porous film as ... The ineluctable introduction of lithium salt to polymer solid-state electrolytes incurs a compromise between strength,ionic conductivity,and thickness.Here,we propose Al2O3-coated polyimide(AO/PI)porous film as a high-strength substrate to support fast-ion-conducting polymer-in-salt(PIS)solid-state electrolytes,aiming to suppress lithium dendrite growth and improve full-cell performance.The Al2O3coating layer not only refines the wettability of polyimide porous film to PIS,but also performs as a high modulus protective layer to suppress the growth of lithium dendrites.The resulting PI/AO@PIS exhibits a small thickness of only 35μm with an outstanding tensile strength of 11.3 MPa and Young's modulus of 537.6 MPa.In addition,the PI/AO@PIS delivers a high ionic conductivity of 0.1 m S/cm at 25°C.As a result,the PI/AO@PIS enables symmetric Li cells to achieve exceptional cyclability for over 1000 h at 0.1 m A/cm2without noticeable lithium dendrite formation.Moreover,the PI/AO@PIS-based LiFePO4||Li full cells demonstrate outstanding rate performance(125.7 m Ah/g at 5 C)and impressive cycling stability(96.1%capacity retention at 1 C after 200 cycles).This work highlights the efficacy of enhancing the mechanical properties of polymer matrices and extending cell performance through the incorporation of a dense inorganic interface layer. 展开更多
关键词 Polymer-in-salt solid-state electrolytes Inorganic interface layer Al2O3interfaciAl layer Li dendrites Cycling performance
暂未订购 下载PDF
不同Al_2O_3-TiO_2-Cr_2O_3-SiO_2配比等离子喷涂层的耐磨粒磨损性能 认领 引用
7
作者 包晔峰 李振宇 +1 位作者 杨可 蒋永锋 《材料保护》 CAS CSCD 北大核心 2013年第4期32-34,8,共3页
为了探讨等离子喷涂制备Al2O3-TiO2-Cr2O3-SiO2层的可行性及其喷涂层的耐磨性,采用等离子喷涂在Q235钢表面分别制备了54%Al2O3-36%TiO2-10%Cr2O3-0.5%SiO2,42%Al2O3-28%TiO2-28.5%Cr2O3-1.5%SiO2和30%Al2O3-20%TiO2-47.5%Cr2O3-2.5%SiO2... 为了探讨等离子喷涂制备Al2O3-TiO2-Cr2O3-SiO2层的可行性及其喷涂层的耐磨性,采用等离子喷涂在Q235钢表面分别制备了54%Al2O3-36%TiO2-10%Cr2O3-0.5%SiO2,42%Al2O3-28%TiO2-28.5%Cr2O3-1.5%SiO2和30%Al2O3-20%TiO2-47.5%Cr2O3-2.5%SiO23种陶瓷层,分析了陶瓷涂层的金相显微形貌、显微硬度及耐磨粒磨损性能,并分析了其耐磨粒磨损的机理。结果表明:3种涂层的显微硬度分布均具有梯度分布特性,Al2O3+Cr2O3硬质相含量越高,涂层硬度越大;30%Al2O3-20%TiO2-47.5%Cr2O3-2.5%SiO2喷涂粉制成的涂层的硬度最大,耐磨粒磨损性能最佳。 展开更多
关键词 等离子喷涂 陶瓷复合涂层 Al2O3-TiO2-Cr2O3-SiO2 配比 硬度 耐磨粒磨损性能
暂未订购 下载PDF
Effect of Fe_2O_3 on non-isothermal crystallization of CaO-MgO-Al_2O_3-SiO_2 glass 认领 引用 被引量：10
8
作者 郁青春 燕春培 +3 位作者 邓勇 冯月斌 刘大春 杨斌 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2015年第7期2279-2284,共6页
The crystallization behavior and kinetics of CaO-MgO-Al2O3 SiO2（CMAS） glass with the Fe2O3 content ranging from zero to 5%were investigated by differential scanning calorimetry（DSC）.The structure and phase analyse... The crystallization behavior and kinetics of CaO-MgO-Al2O3 SiO2（CMAS） glass with the Fe2O3 content ranging from zero to 5%were investigated by differential scanning calorimetry（DSC）.The structure and phase analyses were made by Fourier transform infrared spectroscopy（FT-IR） and X-ray diffraction（XRD）.The experiment results show that the endothermic peak temperature about 760℃ is associated with transition and the exothermic peak temperature about 1000℃ is associated with crystallization.The crystallization peak temperature decreases with increasing the Fe203 content.The crystallization mechanism is changed from two-dimensional crystallization to one-dimensional growth,and the intensity of diopside peaks becomes stronger gradually.There is a saltation for the crystallization temperature with the addition of 0.5%Fe2O3 due to the decomposition of Fe2O3.Si-O-Si,O-Si-O and T-O-T（T=Si,Fe,Al） linkages are observed in Fe2O3-CaO-MgO-Al2O3-SiO2 glass. 展开更多
关键词 CaO-MgO-Al2O3-SiO2 glass Fe2O3 diopside crystallization kinetics
暂未订购 下载PDF
La_2O_3在MgO-Al_2O_3-SiO_2-TiO_2微晶玻璃中的作用 认领 引用 被引量：17
9
作者 迟玉山 沈菊云 +1 位作者 陈学贤 缪之训 《无机材料学报》 SCIE EI CAS 北大核心 2002年第2期348-352,共5页
在MgO－Al2O3－SiO2－TiO2玻璃中添加不同数量的氧化镧，采用差热分析、X射线衍射及电子显微镜等技术研究了氧化镧对玻璃析晶过程与力学性能的影响．氧化镧的加入使玻璃中析出α－堇青石相的温度降低；同时避免了高膨胀方石英相的析出... 在MgO－Al2O3－SiO2－TiO2玻璃中添加不同数量的氧化镧，采用差热分析、X射线衍射及电子显微镜等技术研究了氧化镧对玻璃析晶过程与力学性能的影响．氧化镧的加入使玻璃中析出α－堇青石相的温度降低；同时避免了高膨胀方石英相的析出．随着氧化镧加入量的增加，玻璃整体析晶能力下降，微晶玻璃中晶相含量减少，晶粒尺寸增大，微晶玻璃的弹性模量与硬度减小，断裂韧性增加，体现出大尺寸长柱状金红石晶粒的增韧作用． 展开更多
关键词 MgO-Al2O3-SiO2-TiO2 微晶玻璃 La2O3 晶化 断裂韧性
暂未订购 下载PDF
Characterization and Thermodynamics of Al_2O_3-MnO-SiO_2(-MnS)Inclusion Formation in Carbon Steel Billet 认领 引用 被引量：8
10
作者 Guo-cheng WANG Sheng-li LI +2 位作者 Xin-gang AI Chong-min ZHANG Chao-bin LAI 《Journal of Iron and Steel Research International》 SCIE CAS CSCD 2015年第7期566-572,共7页
A method to extract inclusion particles from solid steel by electrolysis with organic electrolyte solution was introduced; meanwhile, thermodynamics of inclusion formation was calculated using FaetSage software. The r... A method to extract inclusion particles from solid steel by electrolysis with organic electrolyte solution was introduced; meanwhile, thermodynamics of inclusion formation was calculated using FaetSage software. The results showed that there were two kinds of inclusions in the billet, i.e. Al2O3-MnO-SiO2-MnS （AMS-MnS） and Al2O3- MnO-SiO2 （AMS）. Most of AMS-MnS inclusion particles, with diameter of 10--30 μm, showed three-layer structures： SiO2-rich core with a small quantity of Mn, intermediate AMS layer, and MnS outer layer containing small quanti- ties of A1 and O. Most AMS inclusion particles were 50--90 μm and exhibited homogeneous composition. Thermo- dynamic results indicated that SiO2-rich core could form firstly by Si reacting with O in molten steel at temperatures above 1 923 K during Si-Fe alloy addition, and then, the SiO2-rich core could react with Mn and Al to form liquid AMS enveloping the SiO2 rich core at 1823- 1873 K. MnS began to precipitate from AMS when temperature reached 1 728 K. Liquid AMS could form by coupled reaction among Si, Mn, Al and O in molten steel. 展开更多
关键词 Al2 O3-MnO-SiO2 MnS extraction organic electrolyte solution thermodynamics
暂未订购 下载PDF
炉渣组分对CaO-Al_2O_3-SiO_2-TiO_2-MgO-Na_2O渣系粘度的影响 认领 引用 被引量：12
11
作者 佟志芳 乔家龙 陈涛 《过程工程学报》 CAS CSCD 北大核心 2016年第2期189-196,共8页
针对高碱度高氧化铝含氧化钠的CaO-Al2O3-SiO2-TiO2-MgO-Na2O六元渣系,采用有限制的混料均匀设计方法设计实验,在1773K温度熔融还原条件下测定了该渣系的粘度.利用偏最小二乘法回归分析,建立了炉渣组分与粘度的回归方程,利用回归方程分... 针对高碱度高氧化铝含氧化钠的CaO-Al2O3-SiO2-TiO2-MgO-Na2O六元渣系,采用有限制的混料均匀设计方法设计实验,在1773K温度熔融还原条件下测定了该渣系的粘度.利用偏最小二乘法回归分析,建立了炉渣组分与粘度的回归方程,利用回归方程分析了炉渣碱度[w（CaO）/w（SiO2）],MgO,TiO2,Al2O3及Na2O对炉渣粘度的影响.结果表明,回归方程拟合的关联系数RC2为0.9945,方程可很好地预测该渣系的粘度.在实验范围内,炉渣粘度随碱度的增加而增加.碱度一定时,炉渣粘度随MgO,Al2O3,Na2O含量的增加而逐渐降低,随着TiO2的增加先降低后增加.当炉渣碱度小于3.1、MgO质量含量大于4%、Al2O3大于20%、TiO2在3.1%～6.1%、Na2O大于0.75%时,1773K温度下炉渣粘度均小于2Pa×s,此时渣系粘度完全满足实际冶炼要求. 展开更多
关键词 CaO-Al2O3-SiO2-TiO2-MgO-Na2O渣系 组成 粘度 回归方程 熔融还原
暂未订购 下载PDF
Effects of MgO/Al2O3 ratio on viscous behaviors and structures of MgO-Al2O3-TiO2-CaO-SiO2 slag systems with high TiO2 content and low CaO/SiO2 ratio 认领 引用 被引量：11
12
作者 Cong FENG Li-hua GAO +2 位作者 Jue TANG Zheng-gen LIU Man-sheng CHU 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2020年第3期800-811,共12页
The effects of MgO/Al2 O3 ratio on the viscous behaviors of MgO-Al2 O3-TiO2-CaO-SiO2 systems were investigated by the rotating cylinder method.Raman spectroscopy was used to analyze the structural characteristics of s... The effects of MgO/Al2 O3 ratio on the viscous behaviors of MgO-Al2 O3-TiO2-CaO-SiO2 systems were investigated by the rotating cylinder method.Raman spectroscopy was used to analyze the structural characteristics of slag and Factsage 7.0 was adopted to demonstrate the liquidus temperature of slag.The results show that the viscosity and activation energy for viscous flow decrease when the MgO/Al2O3 ratio increases from 0.82 to 1.36.The break point temperature and liquidus temperature of slag initially decrease and subsequently increase.The complex viscous structures are gradually depolymerized to simple structural units.In conclusion,with the increase of MgO/Al2O3 ratio,the degree of polymerization of slag decreases,which improves the fluidity of slag.The variations of liquidus temperature of slag lead to the same changes of break point temperature. 展开更多
关键词 vanadium-bearing titanomagnetite titanium-bearing slag viscous behavior degree of polymerization of slag MgO/Al2O3 ratio
暂未订购 下载PDF
MgO-Al_2O_3-SiO_2-TiO_2-Y_2O_3玻璃的弹性模量 认领 引用 被引量：7
13
作者 迟玉山 沈菊云 +1 位作者 陈学贤 缪之训 《无机材料学报》 SCIE EI CAS 北大核心 2002年第3期475-479,共5页
根据硬盘基板用材料的要求,制备了MgO－Al2O3－SiO2－TiO2－Y2O3高弹性模量玻璃(120GPa)玻璃的弹性模量随组成的变化服从Makishima－Mackenzie理论,MgO、Al2O3、TiO2、Y2O3等具有较高单位体积离解能的氧化物有利于提高玻璃的弹性模量．... 根据硬盘基板用材料的要求,制备了MgO－Al2O3－SiO2－TiO2－Y2O3高弹性模量玻璃(120GPa)玻璃的弹性模量随组成的变化服从Makishima－Mackenzie理论,MgO、Al2O3、TiO2、Y2O3等具有较高单位体积离解能的氧化物有利于提高玻璃的弹性模量．但玻璃弹性模量的理论计算值低于测试值．这是因为Makishima－Mackenzie理论没有考虑玻璃内阳离子的具体配位状态,对MgO、Y2O3堆积密度因子的推导存在误差．因此利用Makishima－Mackenzie理论发展高弹性模量玻璃时应对MgO、Y2O3等氧化物的计算进行修正． 展开更多
关键词 MgO-Al2O3-SiO2-TiO2-Y2O3玻璃 弹性模量 Makishima-Mackenzie理论 硬盘基板
暂未订购 下载PDF
Sintering,crystallization and dielectric properties of CaO-B_2O_3-SiO_2 system glass ceramics 认领 引用 被引量：3
14
作者 戴斌 朱海奎 +2 位作者 周洪庆 许贵军 岳振星 《Journal of Central South University》 SCIE EI CAS 2012年第8期2101-2106,共6页
CaO-B203-SiO2 （CBS） glass powders are prepared by conventional glass melting method at different melting temperatures whose properties and microstructures are characterized by X-ray diffraction （XRD） and scanning ... CaO-B203-SiO2 （CBS） glass powders are prepared by conventional glass melting method at different melting temperatures whose properties and microstructures are characterized by X-ray diffraction （XRD） and scanning electron microscopy （SEM）. It is found that there are SiO2 and some unknown phases in CBS glass melting liquid from 1 300 ℃ to 1 500 ℃ and the amount of these phases decreases with the increase of the melting temperature. The CBS glass melted at 1 450 ℃ could be sintered from 830 ℃ to 930 ℃ and the bulk densities of the samples are all higher than 2.4 g/cm^3. From the points of the properties and energy conservation, the melting temperature of 1 450 ℃ is the optimal melting temperature. The glass ceramic sintered at 850 ℃ exhibits better dielectric properties： er=6.33, tan6=2.2×10^-3 at 10 GHz, and the major phases of the samples are CaSiO3, CaB2O4 and SiO2. 展开更多
关键词 glass ceramics CaO-B2O3-SiO2 sintering dielectric properties microstructure
暂未订购 下载PDF
TiO_2在Al_2O_3-SiO_2系耐火材料中的作用 认领 引用 被引量：3
15
作者 尹玉成 梁永和 +1 位作者 吴芸芸 王继宝 《耐火材料》 EI CAS 北大核心 2006年第2期139-142,共4页
阐述了TiO2在Al2O3-SiO2系耐火材料,特别是高铝矾土中的分布和存在方式,并通过分析Al2O3-SiO2系耐火原料的煅烧过程和Al2O3-SiO2系制品的使用过程中TiO2、Al2O3和SiO2三者之间的化学反应,介绍了TiO2对Al2O3-SiO2系耐火材料结构和性能的... 阐述了TiO2在Al2O3-SiO2系耐火材料,特别是高铝矾土中的分布和存在方式,并通过分析Al2O3-SiO2系耐火原料的煅烧过程和Al2O3-SiO2系制品的使用过程中TiO2、Al2O3和SiO2三者之间的化学反应,介绍了TiO2对Al2O3-SiO2系耐火材料结构和性能的影响。 展开更多
关键词 TiO2 Al2O3-SiO2系耐火材料 结构 性能
暂未订购 下载PDF
Preparation and Optical Properties of Er^3+:Na2O-Al2O3-SiO2 Transparent Glass-Ceramics 认领 引用 被引量：2
16
作者 韦钦磊 张洪波 +5 位作者 ZOU Xiangyu CHEN Chen ZHAO Mengjie WEI Yanling SONG Qiong 苏春辉 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2017年第1期37-41,共5页
Na2O-Al2O3-SiO2 glass-ceramics doped with Er^3＋ ions were synthesized by the conventional melt quenching technique at a low melting temperature.The samples were characterized by differential scanning calorimetry（DSC... Na2O-Al2O3-SiO2 glass-ceramics doped with Er^3＋ ions were synthesized by the conventional melt quenching technique at a low melting temperature.The samples were characterized by differential scanning calorimetry（DSC）,X-ray diffraction（XRD）,scanning electron microscopy（SEM）,UV-vis-NIR scanning spectrophotometry,and fluorescence spectrometry.The results show that the main crystalline phase of glass-ceramics is nepheline.The best heat-treatment process is at 520 ℃ for 2 h.Because the up-conversion luminescence and near infrared luminescence properties of glass doped with Eu^3＋ are studied in detail. 展开更多
关键词 Na2O-Al2O3-SiO2 Er^3＋ ions glass-ceramics up-conversion＆NIR luminescence
暂未订购 下载PDF
Sol-Gel法制备Al_2O_3-SiO_2-TiO_2-ZrO_2复合陶瓷膜的研究 认领 引用 被引量：4
17
作者 徐晓虹 吴建锋 +1 位作者 白占良 张英 《中国陶瓷》 CAS 2003年第6期21-23,共3页
将Sol-Gel法应用于无机膜的制备,成功的研制出一种新型的膜面平整、膜厚均匀且无宏观缺陷的Al2O3-SiO2-TiO2-ZrO2复合陶瓷膜,复合膜含有γ-Al2O3、SiO2、TiO2、ZrO2和Al2SiO5等晶相,改变体系组成含量,晶相组成和含量随之变化,从而引起... 将Sol-Gel法应用于无机膜的制备,成功的研制出一种新型的膜面平整、膜厚均匀且无宏观缺陷的Al2O3-SiO2-TiO2-ZrO2复合陶瓷膜,复合膜含有γ-Al2O3、SiO2、TiO2、ZrO2和Al2SiO5等晶相,改变体系组成含量,晶相组成和含量随之变化,从而引起膜的显微结构的变化。利用XRD、SEM、AFM、EPMA等测试手段重点研究了膜的表面形貌和显微结构,并分析了添加剂、热处理方式等对膜的表面形貌和显微结构影响。 展开更多
关键词 溶胶—凝胶法 Al2O3—SiO2—TiO2—ZrO2复合陶瓷膜 表面形貌 显微结构
暂未订购 下载PDF
Three-photon-excited fluorescence of Tb3+-doped CaO-Al_2O_3-SiO_2 glass by femtosecond laser irradiation 认领 引用 被引量：3
18
作者 马红萍 祝邦文 邹凤楼 《Journal of Rare Earths》 SCIE EI CAS 2008年第6期928-931,共4页
A near infrared to visible blue, green, and red upconversion luminescence in a Tb^3＋-doped CaO-Al2O3-SiO2 glass was studied, which was excited using 800 nm femtosecond laser irradiation. The upconversion luminescence... A near infrared to visible blue, green, and red upconversion luminescence in a Tb^3＋-doped CaO-Al2O3-SiO2 glass was studied, which was excited using 800 nm femtosecond laser irradiation. The upconversion luminescence was attributed to ^5D3→^7F5, ^5D3→^7F4, ^5D3→^7F3, ^5D4→^7F6, ^5D4→^7F5, ^5D4→^7F4, and ^5D4→^7F3 transitions of Tb^3＋. The relationship between upconversion luminescence intensity and the pump power indicated that a three-photon simultaneous absorption process was dominant in this upconversion luminescence. The intense red, green, and blue upconversion luminescence of Tb^3＋-doped CaO-Al2O3-SiO2 glass may be potentially useful in developing three-dimensional display applications. 展开更多
关键词 three-photon-excited fluorescence three-dimensional （3D） volumetric display Tb^3＋-doped CaO-Al2O3-SiO2 glass rare earths
暂未订购 下载PDF
Selective Hydrogenation of Butyne-1,4-diol to Butane-1,4-diol over Ni/Al_2O_3-SiO_2 Catalysts 认领 引用 被引量：2
19
作者 Fang Jie Zhuang Changjian +2 位作者 Meng Jipeng Cheng Lang Lu Jiangyin 《China Petroleum Processing & Petrochemical Technology》 CAS 2018年第4期20-28,共9页
Ni/Al_2O_3-SiO_2 catalysts were synthesized via one-step method employing SiO_2 as an additive for the selective hydrogenation of butyne-1,4-diol(B_3D) to butane-1,4-diol(B1D). The prepared catalysts were evaluated by... Ni/Al_2O_3-SiO_2 catalysts were synthesized via one-step method employing SiO_2 as an additive for the selective hydrogenation of butyne-1,4-diol(B_3D) to butane-1,4-diol(B1D). The prepared catalysts were evaluated by a series of characterization techniques including BET, XRD, SEM, EDX-mapping, TEM, H_2-TPR, XPS, NH_3-TPD and Py-FTIR. Compared to Ni/Al_2O_3 catalyst, the SiO_2-doped samples exhibited better B_3D conversion. SiO_2 could help to form a strong interaction between NiO with the support, which inhibited Ni agglomeration at high temperature, improved the Ni dispersion, and enhanced the hydrogenation activity. B_1D selectivity was mainly influenced by the quantity of Lewis acid sites in addition to the Ni dispersion. The catalyst with a silica loading of 6.4% demonstrated an excellent selectivity of 75.18%(by 13% higher than the contrastive Ni/Al_2O_3 catalyst), which was attributed to the larger amount of Lewis acid sites and the moderate interaction between NiO with the support, which could facilitate the nickel dispersion on a preferable surface area of 176.3 m^2/g of support. 展开更多
关键词 Ni/Al2O3-SiO2 catalysts butyne-1,4-diol butane-1,4-diol hydrogenation
暂未订购 下载PDF
Thermal Behavior and Lithium Ion Conductivity of L_2O-Al_2O_3-TiO_2-SiO_2-P_2O_5 Glass-ceramics 认领 引用 被引量：2
20
作者 CHEN Hongping TAO Haizheng +1 位作者 WU Qide ZHAO Xiujian 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2012年第1期67-72,共6页
A lithium ion conductive solid electrolyte, L20-AI203-TiO2-SiO2-P20s glass with NASICON- type structure have been synthesized and transformed into glass-ceramic through thermal-treatment at various temperatures from 7... A lithium ion conductive solid electrolyte, L20-AI203-TiO2-SiO2-P20s glass with NASICON- type structure have been synthesized and transformed into glass-ceramic through thermal-treatment at various temperatures from 700 to 1 000 ~C for 12 h. The differential scanning calorimetry （DSC）, X-ray diffraction （XRD）, scanning electron microscopy （SEM） and complex impedance techniques were employed to characterize the samples. The experimental results indicated that the capability of glass forming in this system is superior to that of L20-A1203-TiO2-PzO~. The glass has an amorphous structure and resultant glass-ceramic mainly consisting of LiTi2（PO4）3 phases. Impurity phases AIPO4, TiO2, TiP207 and unidentified phase were observed. With the enhanced heat-treatment temperature, grain grew gradually and lithium ion conductivity of glass-ceramics increased accordingly, the related impedance semicircles were depressed gradually and even disappeared, which could be analytically explained by the coordinate action of the ＇Constant phase element＇ （CPE） model and the ＇Concept of Mismatch and Relaxation＇ model （CMR）. When the sample is devitrified at 1 000 ~C, the maximum room temperature lithium ion conductivity comes up to 4.1 x 10-4 S/cm, which is suitable for the application as an electrolyte of all-solid-state lithium batteries. 展开更多
关键词 inorganic solid electrolyte glass-ceramic L2O-A12O3-TiO2-SiO2-P2O5 system LiTi2（PO4）3phase
暂未订购 下载PDF
已选0条
引用分析
参考文献
引证文献
 统计分析
检索结果
已选文献
上一页 1 2 … 250 下一页 到第 页
在线咨询 使用帮助 返回顶部 意见反馈