期刊文献+
任意字段
题名或关键词
题名
关键词
摘要
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息
共找到26篇文章
< 1 2 >
每页显示 20 50 100
已选0条
引用分析
参考文献
引证文献
 统计分析
检索结果
已选文献
显示方式：
Laser Cladding Al-Si/Al_2O_3-TiO_2 Composite Coatings on AZ31B Magnesium Alloy 认领 引用 被引量：4
1
作者 崔泽琴 YANG Hongwei +2 位作者 王文先 WU Hongliang XU Bingshe 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2012年第6期1042-1047,共6页
To improve the wear resistance and corrosion resistance of magnesium alloys, a 5 kW continuous wave CO2 laser was used to investigate the laser surface cladding on AZ31 B magnesium alloys with Al-Si/Al2O3-TiO2 composi... To improve the wear resistance and corrosion resistance of magnesium alloys, a 5 kW continuous wave CO2 laser was used to investigate the laser surface cladding on AZ31 B magnesium alloys with Al-Si/Al2O3-TiO2 composite powders. A detailed microstructure, chemical composition, and phase analysis of the composite coatings were studied by scanning electron microscopy （SEM）, energy dispersive spectroscopy （EDS）, and X-ray diffraction （XRD）. The laser cladding shows good metallurgical bonding with the substrate. The composite coatings are composed of Mgl7Al12, Al3Mg2, Mg2Si, Al2O3, and TiO2 phases. Compared to the average microhardness （50HV0.05） of the AZ3 1 B substrate, that of the composite coatings （230HV0.05） is improved significantly. The wear resistances of the surface layers were evaluated in detail. The results demonstrate that the wear resistances of the laser surface-modified samples are considerably improved compared to the substrate. It also show that the composite coatings exhibit better corrosion resistance than that of the substrate in 3.5wt% NaCI solution. 展开更多
关键词 AZ31B magnesium alloy laser cladding Al-Si/Al2O3-TiO2 composite coating wear resistance corrosion resistance
暂未订购 下载PDF
Preparation of Al_2O_3-SiO_2-TiO_2-ZrO_2 Composite Ceramic Membranes by Sol-Gel Method 认领 引用
2
作者 吴建锋 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2005年第1期42-45,共4页
Al 2O 3-SiO 2-TiO 2-ZrO 2 supported membranes were prepar ed by Sol-Gel method. These composite ceramic membranes are level, even and no macro crack. There exist several crystalline phases such as Al 2O 3, TiO 2(a nat... Al 2O 3-SiO 2-TiO 2-ZrO 2 supported membranes were prepar ed by Sol-Gel method. These composite ceramic membranes are level, even and no macro crack. There exist several crystalline phases such as Al 2O 3, TiO 2(a natase), Al 2SiO 5, and ZrO 2 in these membranes. Changing the molar ratio of Al∶Si∶Ti∶Zr,the kinds and content of crystal phases of composite membranes could be different, which may lead to a variety of microstructure of membranes. The surface nanoscale topography and microstructure of membranes were investiga ted by XRD,SEM,AFM,EPMA. The effects of additives and heat treatments on the sur face nanoscale topography and microstructure of composite ceramic membranes were also analyzed. 展开更多
关键词 sol-gel method Al 2O 3-SiO 2-TiO 2-ZrO 2 composite ceramic membranes surface nanoscale topography microstructure
暂未订购 下载PDF
Effect of Nano-ZrO2on Microstructure and Thermal Shock Behaviour of Al_2O3/SiC Composite Ceramics Used in Solar Thermal Power 认领 引用 被引量：7
3
作者 XU Xiaohong JIAO Guohao +3 位作者 WU Jianfeng LENG Guanghui FANG Binzheng ZHAO Fang 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2011年第2期285-289,共5页
The Al2O3-ZrO2(3Y)-SiC composite ceramics used in solar thermal power were prepared by micrometric Al2O3,nano-ZrO2 and SiC powders under the condition of pressureless sintering.The bulk density and bending strength of... The Al2O3-ZrO2(3Y)-SiC composite ceramics used in solar thermal power were prepared by micrometric Al2O3,nano-ZrO2 and SiC powders under the condition of pressureless sintering.The bulk density and bending strength of samples with 10vol%nano-ZrO2 sintered at 1480℃were 3.222 g/cm3 and 160.4MPa,respectively.The bending strength of samples after 7 times thermal shock tests(quenching from 1000℃to 25℃in air medium)is 132.0MPa,loss rate of bending strength is only 17%.The effect of nano-ZrO2 content on the microstructure and performance of Al2O3-ZrO2(3Y)-SiC composite ceramic was investigated.The experimental results show that the bending strength of samples with above 10vol%nano-ZrO2 content has decreased,because the volume expansion resulting from t-ZrO2 to m-ZrO2 phase transformation is excessive;Adding proper nano-ZrO2 would be contributed to improve the thermal shock resistance of the composite ceramics.The Al2O3-ZrO2(3Y)-SiC composite ceramic has promising potential application in solar thermal power. 展开更多
关键词 Al2O3 nano-ZrO2 transformation toughening thermal shock resistance composite ceramics solar thermal power
暂未订购 下载PDF
Fabrication of Ce-doped(Gd2Y)Al5O12/Y3Al5O12 composite-phase scintillation ceramic 认领 引用 被引量：6
4
作者 Shuilin Chen Benxue Jiang +5 位作者 Yang Wang Qiangqiang Zhu Qinghua Yang Wanqiu Ma Ge Zhang Long Zhang 《Journal of Rare Earths》 SCIE EI CAS CSCD 2019年第9期978-983,I0003,共6页
In this paper,a novel Ce(Gd2 Y)Al5O12/Ce:Y3Al5O12(Ce:GYAG/Ce:YAG)composite scintillation ceramic was designed and fabricated by a solid-state reaction method.The phase,luminescence and scintillation properties were in... In this paper,a novel Ce(Gd2 Y)Al5O12/Ce:Y3Al5O12(Ce:GYAG/Ce:YAG)composite scintillation ceramic was designed and fabricated by a solid-state reaction method.The phase,luminescence and scintillation properties were investigated.The Ce:GYAG/Ce:YAG composite ceramic consisting of two-phase has a broad emission band ranging from 500 to 750 nm.The total mass attenuation coefficient of Ce:GYAG/Ce:YAG is 0.3864 cm^-1,in between those of Ce:YAG and Ce:GYAG ceramics.In addition,the composite ceramic had a high light yield of 20430 ph/MeV.By controlling the ratio of GYAG and YAG,the composite ceramic can realize a spectrum design and total mass attenuation coefficient control to meet the requirements for wide-X-ray-energy-range detectors. 展开更多
关键词 Ce:(Gd2Y)Al5O12/Ce:Y3Al5O12 composite ceramic Spectrum control X-ray energy Rare earths
暂未订购 下载PDF
Effect of MoSi_2 content on dielectric and mechanical properties of MoSi_2/Al_2O_3 composite coatings 认领 引用 被引量：7
5
作者 WU Zhi-hong ZHOU Wan-cheng +1 位作者 LUO Fa ZHU Dong-mei 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2012年第1期111-116,共6页
Molybdenum disilicide （MoSi2） sheath and aluminum oxide （Al2O3） core blended powders were fabricated by spray drying. A derived coating material was produced for the application as microwave absorbers using the as... Molybdenum disilicide （MoSi2） sheath and aluminum oxide （Al2O3） core blended powders were fabricated by spray drying. A derived coating material was produced for the application as microwave absorbers using the as prepared powders by atmospheric plasma spray （APS） technology. The effects of MoSi2/Al2O3 mass ratio on the dielectric and physical mechanical properties of the composite coatings were investigated. When the MoSi2 content of the composites increases from 0 to 45%, the flexure strength and fracture toughness improve from 198 to 324 MPa and 3.05 to 4.82 MPa-m1/2 then decline to 310 MPa and 4.67 MPa-m1/2, respectively. The dielectric loss tangent increases with increasing MoSi2 content, and the real part of permittivity decreases conversely over the frequency range of 8.2-12.4 GHz. These effects are due to the agglomeration of early molten MoSi2 particles and the increase of the electrical conductivity with increasing MoSi2 content. 展开更多
关键词 MoSi2/Al2O3 composite coating atmospheric plasma spraying mechanical properties dielectric properties
暂未订购 下载PDF
Interface characteristics of Al_2O_3-13%TiO_2 ceramic coatings prepared by laser cladding 认领 引用 被引量：4
6
作者 高雪松 田宗军 +1 位作者 刘志东 沈理达 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2012年第10期2498-2503,共6页
Al2O3-13%TiO2 （mass fraction） coatings, prepared by laser cladding on nickel-based alloy, were heated using high frequency induction sources. The coating microstructure and the interface between bond coating and cer... Al2O3-13%TiO2 （mass fraction） coatings, prepared by laser cladding on nickel-based alloy, were heated using high frequency induction sources. The coating microstructure and the interface between bond coating and ceramic coating were characterized by SEM, XRD and EDS. The results show that two-layer substructure exists in the ceramic coating： one layer evolving from fully melted region where the sintered grains grow fully; another layer resembling the liquid-phase-sintered structure consisting of three-dimensional net where the melted Al2O3 particles are embedded in the TiO2-rich matrix. The mechanism of the two-layer substructure formation is also explained in terms of the melting and flattening behavior of the powders during laser cladding processing. The spinel compounds NiAl2O4 and acicular compounds Cr2O3 are discovered in the interface between bond coating and ceramic coating. It proves that the chemical reactions in the laser cladding process will significantly enhance the coating adhesion. 展开更多
关键词 ceramic coating nickel alloy laser cladding Al2O3-TiO2 high frequency induction
暂未订购 下载PDF
Thermal shock fatigue behavior of TiC/Al_2O_3 composite ceramics 认领 引用 被引量：6
7
作者 SI Tingzhi LIU Ning +1 位作者 ZHANG Qing＇ an YOU Xianqing 《Rare Metals》 SCIE EI CAS 2008年第3期308-314,共7页
The thermal shock fatigue behaviors of pure hot-pressed alumina and 30 wt.% TiC/Al2O3 composites were studied. The effect of TiC and Al2O3 starting particle size on the mechanical properties of the composites was disc... The thermal shock fatigue behaviors of pure hot-pressed alumina and 30 wt.% TiC/Al2O3 composites were studied. The effect of TiC and Al2O3 starting particle size on the mechanical properties of the composites was discussed. Indentation-quench test was conducted to evaluate the effect of thermal fatigue temperature difference （ΔT） and number of thermal cycles （Ⅳ） on fatigue crack growth （Δa）. The mechanical properties and thermal fatigue resistance of TiC/Al203 composites are remarkably improved by the addition of TiC. The thermal shock fatigue of monolithic alumina and TiC/Al2O3 composites is due to a ＂true＂ cycling effect （thermal fatigue）. Crack deflection and bridging are the predominant reasons for the improvement of thermal shock fatigue resistance of the composites. 展开更多
关键词 ceramic matrix composites TiC/Al2O3 composites thermal shock fatigue fatigue behavior fatigue resistance
暂未订购 下载PDF
Mechanical properties and plasma erosion resistance of BN_p/Al_2O_3-SiO_2 composite ceramics 认领 引用 被引量：5
8
作者 段小明 贾德昌 +5 位作者 周玉 杨治华 王玉金 任凤琴 于达仁 丁永杰 《Journal of Central South University》 SCIE EI CAS 2013年第6期1462-1468,共7页
BNp/Al2O3-SiO2 system ceramic matrix composites with different volume fractions （10%-60%） of hexagonal BN particulates （BNp） were prepared by hot-press sintering technique. Phase components, microstructure, mechan... BNp/Al2O3-SiO2 system ceramic matrix composites with different volume fractions （10%-60%） of hexagonal BN particulates （BNp） were prepared by hot-press sintering technique. Phase components, microstructure, mechanical properties and plasma erosion resistance were also investigated. With the increase of h-BNp content, relative density and Vickers＇ hardness of the composite ceramics decrease, while the flexural strength, elastic modulus and fracture toughness increase and then decrease. The plasma erosion resistance linearly deteriorated with the increase of BNp content which is mainly determined by the density, crystal structure and atomic number of the elements. 展开更多
关键词 BNp/Al2O3-SiO2 composite ceramics microstructures mechanical properties plasma erosion resistance
暂未订购 下载PDF
Preparation of Al_2O_3/Au nano-laminated composite coatings and their oxidation resistance on stainless steel 认领 引用 被引量：3
9
作者 高俊国 陆峰 +2 位作者 汤智慧 王长亮 何业东 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2012年第10期2491-2497,共7页
Al2O3/Au nano-laminated composite coatings were prepared by means of magnetron sputtering. The coating was compact and comprised of nano-laminated Al2O3 and Au layers. High temperature cyclic oxidation test was employ... Al2O3/Au nano-laminated composite coatings were prepared by means of magnetron sputtering. The coating was compact and comprised of nano-laminated Al2O3 and Au layers. High temperature cyclic oxidation test was employed to investigate the oxidation resistance of the composite coatings. The results revealed that the applied Al2O3/Au nano-laminated composite coatings improved the oxidation and spallation resistance of the stainless steel substrate significantly. The mechanism accounting for oxidation resistance was related with the suppression of inward oxygen diffusion and selective oxidation of Cr in the substrate. The mechanism accounting for spallation resistance was attributed to the relaxation of thermal stress by the nano-laminated structure. 展开更多
关键词 Al2O3/Au composite coatings magnetron sputtering oxidation resistance spallation resistance
暂未订购 下载PDF
Parameter optimization for plasma-sprayed Al2O3p/Al composite coatings on AZ31 magnesium alloy 认领 引用 被引量：1
10
作者 马凯 孙大千 +2 位作者 谷晓燕 李于朋 宣兆志 《China Welding》 EI CAS 2010年第1期15-20,共6页
Al2O3p/Al composite coatings were prepared on the surface of AZ31 magnesium alloy by plasma spraying technology with mixed powders of Al and Al2O3. An orthogonal test containing six factors and five levels was carried... Al2O3p/Al composite coatings were prepared on the surface of AZ31 magnesium alloy by plasma spraying technology with mixed powders of Al and Al2O3. An orthogonal test containing six factors and five levels was carried out to acquire the optimum technical parameters. Mierostruetures and properties of the composite coatings were studied. The results show that the coatings consist of Al2O3 particulates distributed uniformly and Al matrix, and the interface between the particulate and matrix is continuous, compact and clean. With increasing the mass fraction of Al2O3 in the mixed powders, the volume fraction of Al2O3 in the coatings iacreases. The Al2O3p/Al composite coating with 14% Al2O3 volume fraction has more compact microstrueture and more satisfactory properties. 展开更多
关键词 plasma spraying Al2O3p/Al composite coating microstructure parameter optimization
暂未订购 下载PDF
Effect of Al_2O_3on Structure and Wearability of Composite Coating 认领 引用 被引量：1
11
作者 DING Hong-yan ZHANG Yue 《Journal of Iron and Steel Research International》 SCIE CAS 2004年第3期59-62,共4页
The composite coating was prepared by thermal spray welding after making composite powder,which is composed of Ni-based self-melted alloy and AlOceramic powder including nano,sub-micron and micron powders.The influenc... The composite coating was prepared by thermal spray welding after making composite powder,which is composed of Ni-based self-melted alloy and AlOceramic powder including nano,sub-micron and micron powders.The influences of contents and sizes of AlOon the structure and wearability were investigated.The results show that the wear resistance of the coating would be increased greatly by adding AlO,but the spray weldability decreases with increasing AlOcontent.So there is an optimal content of AlOpowder.The composite coating with AlOnano or sub-micron powder of 0.5% has the best abrasive resistance,while the optimal content of AlOmicron powder is 1 %. 展开更多
关键词 ceramic powder thermal spray welding composite coating Al2O3 nano-powder
暂未订购 下载PDF
Manufacture and characteristics of Al2O3 composite coating on steel substrate by SHS process 认领 引用 被引量：8
12
作者 Hai-Dong Gao Ze-Hua Wang Jia Shao 《Rare Metals》 SCIE EI CAS CSCD 2019年第7期704-712,共9页
Many steel components are needed to be reinforced on their surface to have a high abrasive resistance and corrosion resistance. Based on self-propagating hightemperature synthesis, a process to making Al2O3 composite ... Many steel components are needed to be reinforced on their surface to have a high abrasive resistance and corrosion resistance. Based on self-propagating hightemperature synthesis, a process to making Al2O3 composite coatings on mild steel substrate in atmospheric environment with the help of simple auxiliary facilities was developed successfully. A pre-coated bilayer coating was employed. The effects of Fe content in pre-coated transition layer on phase composition, porosity and interfacial bon ding were studied using scanning electron microscopy (SEM), energy-dispersive spectrum (EDS) and X-ray diffraction (XRD). The thermal shock resistance and abrasive resistance were investigated. When Fe content changes from 0 wt% to 50 wt%, the bond quality at first becomes better and then worse gradually. When Fe content is less 20 wt%, there is a small gap between the transition layer and the substrate;when Fe contents are 30 wt% and 40 wt%, working layer, the transition layer and the substrate bond together well. The working layer is mainly composed of Al2O3, Fe-Cr and Al(Cr)2O3 phases and has a dense structure with porosity of less than 1 %. The coating has a good thermal shock resistance and abrasive resistance. The abrasive resistance of the working layer is about ten times that of the substrate. 展开更多
关键词 Al2O3 composite coating Self-propagating high-temperature synthesis Interfacial bonding Thermal shock resistance Abrasive resistance
暂未订购 下载PDF
Preparation of Al2O3/Y2O3 composite coating for deuterium permeation reduction 认领 引用 被引量：4
13
作者 Weijing Wang Qinghe Yu +1 位作者 Xiaopeng Liu Zheng Lu 《Journal of Rare Earths》 SCIE EI CAS CSCD 2020年第11期1237-1242,I0004,共6页
A tritium permeation barrier is required in fusion blankets for the reduction of fuel loss and radiological hazard.In this study,an Al2O3/Y2O3 composite coating was prepared on 316 L stainless steel by radiofrequency ... A tritium permeation barrier is required in fusion blankets for the reduction of fuel loss and radiological hazard.In this study,an Al2O3/Y2O3 composite coating was prepared on 316 L stainless steel by radiofrequency magnetron sputtering in order to improve the tritium permeation resistance.The microstructure and the phase composition of the Al2O3/Y2O3 composite coating are observed by scanning electron microscopy,transmission electron microscopy and grazing incidence X-ray diffraction.Moreover,Auger electron spectroscopy was used to characterize the depth profiles of Al,Y and O elements.The results clearly indicate that the Al2O3/Y2O3 composite coating is fully dense and the total thickness is approximately 340 nm.The Al2O3/Y2O3 coating consists of an amorphous Al2O3 and the cubic Y2O3,in which Al,Y and O elements are homogeneously distributed in the vertical base direction.Furthermore,the deuterium permeation property of the Al2O3/Y2O3 composite coating was measured by the gas phase permeation method.The results show that the introduction of an interface and the existence of a tiny amount of micro-defects improve the deuterium resistance of the Al2O3/Y2O3 coating,and its deuterium permeation reduction factor is 536-750 at 873-973 K.Therefore,it is concluded that the Al2O3/Y2O3 co mposite coating as deuterium permeation barrier can significa ntly enha nce the deuterium permeation resistance property. 展开更多
关键词 Deuterium Permeation barrier Al2O3 coating Y2O3 coating Composite coating Rare earths
暂未订购 下载PDF
Effect of Interfacial Bonding on the Toughening of Al_2O_3/Ni Ceramic Matrix Composites 认领 引用
14
作者 Xudong SUNJ.A. Yeomans 《Journal of Materials Science & Technology》 SCIE EI CAS 1996年第1期29-34,共6页
The main Iimitation to the toughening of the α-Al2O3/Ni composite is the poor bonding atthe interface. which causes the nickel particles to be pulled-out during crack propagation with-out obvious plastic deformation.... The main Iimitation to the toughening of the α-Al2O3/Ni composite is the poor bonding atthe interface. which causes the nickel particles to be pulled-out during crack propagation with-out obvious plastic deformation. A proper control of oxygen content at the Al2O3-Ni interfacecan promote wetting at the intedece, and produce a mechanically interlocked and chemically strengthened intedece, causing most of the nickel particles to be stretched to failure and to expe-rience severe plastic deformation during crack propagation in the composite. Fracture toughnesstesting using a modified double cantilever beam method with in situ observation of crack prop-agation in a scanning electron microscope shows that the composite with the strengthenedinterface has a more desirable R-curve behaviour and a higher fracture toughness value than thenormal composite. 展开更多
关键词 Al Effect of Interfacial Bonding on the Toughening of Al2O3/Ni Ceramic Matrix Composites Ni
暂未订购 下载PDF
RE-Al_2O_3 Ceramic Coating 认领 引用
15
《China Rare Earth Information》 1999年第4期3-3,共1页
关键词 RE-Al2O3 Ceramic Coating Al
暂未订购 下载PDF
(La0.2Ce0.2Nd0.2Sm0.2Eu0.2)PO4: A high-entropy rare-earth phosphate monazite ceramic with low thermal conductivity and good compatibility with Al2O3 认领 引用 被引量：28
16
作者 Zifan Zhao Heng Chen +4 位作者 Huimin Xiang Fu-Zhi Dai Xiaohui Wang Zhijian Peng Yanchun Zhou 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2019年第12期2892-2896,共5页
Low thermal conductivity, matched thermal expansion coefficient and good compatibility are general requirements for the environmentalhermal barrier coatings(EBCs/TBCs) and interphases for Al2O3 f/Al2O3 composites. In ... Low thermal conductivity, matched thermal expansion coefficient and good compatibility are general requirements for the environmentalhermal barrier coatings(EBCs/TBCs) and interphases for Al2O3 f/Al2O3 composites. In this work, a novel high-entropy(HE) rare-earth phosphate monazite ceramic (La0.2Ce0.2Nd0.2Sm0.2Eu0.2)PO4 is designed and successfully synthesized. This new type of HE rare-earth phosphate monazite exhibits good chemical compatibility with Al2O3, without reaction with Al2O3 as high as 1600℃ in air. Moreover, the thermal expansion coefficient(TEC) of HE (La0.2Ce0.2Nd0.2Sm0.2Eu0.2)PO4(8.9 × 10^-6/℃ at 300–1000℃) is close to that of Al2O3. The thermal conductivity of HE (La0.2Ce0.2Nd0.2Sm0.2Eu0.2)PO4 at room temperature is as low as 2.08 W·m^-1·K^-1, which is about 42% lower than that of La PO4. Good chemical compatibility, close TEC to that of Al2O3, and low thermal conductivity indicate that HE (La0.2Ce0.2Nd0.2Sm0.2Eu0.2)PO4 is suitable as a candidate EBC/TBC material and an interphase for Al2O3 f/Al2O3 composites. 展开更多
关键词 (La0.2Ce0.2Nd0.2Sm0.2Eu0.2)PO4 High-entropy ceramics Al2O3f/Al2O3ceramic matrix composites Environmental barrier coating materials Interphase material Thermal expansion coefficient Thermal conductivity Solution synthesis Rare-earth phosphates Monazite
暂未订购 下载PDF
Microstructural Characteristics and Wear Performance of Plasma Sprayed Al_2O_3-13 wt. % TiO_2 Coating on the Surface of Extrusion Wheel 认领 引用
17
作者 ZHANG Xue-fei REN Li-min 《International Journal of Plant Engineering and Management》 2013年第3期165-172,共8页
The conventional Al2O3-13 wt. % TiO2 composite ceramic coatings are fabricated by plasma spraying on the surface of extrusion wheel. The microstrueture, morphology and phase compositions of the substrate and coat- ing... The conventional Al2O3-13 wt. % TiO2 composite ceramic coatings are fabricated by plasma spraying on the surface of extrusion wheel. The microstrueture, morphology and phase compositions of the substrate and coat- ing are investigated by using X-ray diffractometry （XRD） , scanning electron microsopy （SEM） and energy dis- persive spectroscopy （EDS）. Moreover, the microhardness of the substrate and the coating are investigated using Vickers mierohardness tester, the friction and wear behaviors of the substrate and the coating are investigated by using a block-on-ring tribometer under dry sliding conditions with the load of 245 N. The results show that both γ-Al2O3 and α-Al2O3 phases are observed in the as-sprayed coatings, the mian phase is γ-Al2O3. There are white particulates Al2O3 on its surface. The Al2O3-13 wt. % TiO2 coating possesses higher mierohardness which is about 1018HV and 1.6 times that of the substrate. The wear performance of coating is better than that of the substrate. In a practical application, the life of the extrusion wheel which is plasma sprayed Al2O3-13 wt. % TiO2 coating on the surface is 1.2 times that of the conventional extrusion wheel, and the life is about 330 h. 展开更多
关键词 extrusion wheel plasma spraying Al2O3-13 wt. % TiO2 ceramic coating wear performance
暂未订购 下载PDF
Corrosion Behavior of Electrodepositing Ni/Al_2O_3 Composite Coatings under the Presence of NaCl Deposit 认领 引用
18
作者 谢丹阳 刘琳 《Journal of Rare Earths》 SCIE EI CAS 2007年第S2期90-93,共4页
The morphology and corrosion behavior of Ni/Al2O3 composite coatings prepared using double-pulsed electrodepositing technique after oxidized under 800 ℃ NaCl deposit in air environment were analyzed by scanning elect... The morphology and corrosion behavior of Ni/Al2O3 composite coatings prepared using double-pulsed electrodepositing technique after oxidized under 800 ℃ NaCl deposit in air environment were analyzed by scanning electrical microscope (SEM), X-ray diffraction(XRD) and energy dispersive spectrum(EDS). The results showed that the corrosion of all composite coatings was accelerated under NaCl deposits, and the corrosion products were rather porous with poor adherence to the matrix. Al2O3 particles in the coatings can refine the grain size and improve the high temperature corrosion resistance of the coatings. Within the test scope, the more Al2O3 particles in the coatings, the lower corrosion rates could be obtained, and the corrosion mechanism was also discussed. 展开更多
关键词 Ni/Al2O3 composite coatings electrodeposition NaCl corrosion rare earths
暂未订购 下载PDF
Preliminary Study on Combining K2O-Al2O3-SiO2 System Dental Glass Ceramic with Al2O3 Ceramic 认领 引用
19
作者 吴琪琪 XU Yujing +1 位作者 JIN Fengchao 张飚 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2017年第2期491-493,共3页
Relationship between K2O-Al2O3-SiO2 system dental glass ceramics and Al2O3 ceramics was investigated. 4 groups of glass ceramic with the same components but different thickness（0.8, 1.2, 1.6, and 2.0 mm） were sinter... Relationship between K2O-Al2O3-SiO2 system dental glass ceramics and Al2O3 ceramics was investigated. 4 groups of glass ceramic with the same components but different thickness（0.8, 1.2, 1.6, and 2.0 mm） were sintered on Al2O3 base ceramics according to the same thermal treatment system of leucite micro-crystallization reported in previous literatures. The products of each group were analyzed by polarizing microscope, X-ray diffractometer, and an INSTRON material testing machine. Under the thermal treatment system, leucite crystals were formed in samples of each group, and dispersed evenly. Meanwhile, the compressive strengths of group 3 and group 4 were higher than those of group 1 and group 2. Samples of group 3 showed better mechanical properties than others. The conclusions are drawn that Leucite crystals can be controlled in K2O-Al2O3-SiO2 system glass ceramic-Al2O3 ceramic composite material, and the thickness of glass ceramic has a notable influence on the compressive strength of this ceramic composite material. 展开更多
关键词 glass ceramics Al2O3 ceramics composite ceramic material compressive strength
暂未订购 下载PDF
Sol-Gel法制备Al_2O_3-SiO_2-TiO_2-ZrO_2复合陶瓷膜的研究 认领 引用 被引量：4
20
作者 徐晓虹 吴建锋 +1 位作者 白占良 张英 《中国陶瓷》 CAS 2003年第6期21-23,共3页
将Sol-Gel法应用于无机膜的制备,成功的研制出一种新型的膜面平整、膜厚均匀且无宏观缺陷的Al2O3-SiO2-TiO2-ZrO2复合陶瓷膜,复合膜含有γ-Al2O3、SiO2、TiO2、ZrO2和Al2SiO5等晶相,改变体系组成含量,晶相组成和含量随之变化,从而引起... 将Sol-Gel法应用于无机膜的制备,成功的研制出一种新型的膜面平整、膜厚均匀且无宏观缺陷的Al2O3-SiO2-TiO2-ZrO2复合陶瓷膜,复合膜含有γ-Al2O3、SiO2、TiO2、ZrO2和Al2SiO5等晶相,改变体系组成含量,晶相组成和含量随之变化,从而引起膜的显微结构的变化。利用XRD、SEM、AFM、EPMA等测试手段重点研究了膜的表面形貌和显微结构,并分析了添加剂、热处理方式等对膜的表面形貌和显微结构影响。 展开更多
关键词 溶胶—凝胶法 Al2O3—SiO2—TiO2—ZrO2复合陶瓷膜 表面形貌 显微结构
暂未订购 下载PDF
已选0条
引用分析
参考文献
引证文献
 统计分析
检索结果
已选文献
上一页 1 2 下一页 到第 页
在线咨询 使用帮助 返回顶部 意见反馈