A series of catalysts were prepared by doping different loadings of CeO2 over TiO2-SiO2-WO3 and used for the selective catalytic reduction of NOx by NH3. The experimental results showed that the selective catalytic re...A series of catalysts were prepared by doping different loadings of CeO2 over TiO2-SiO2-WO3 and used for the selective catalytic reduction of NOx by NH3. The experimental results showed that the selective catalytic reduction(SCR) performance and SO2-resistant ability of TiO2-SiO2-WO3 were greatly enhanced by the introduction of cerium. The catalyst containing 10% CeO2 showed the highest NO conversion in a wide temperature range and good N2 selectivity with broad operation temperature window at the gas hourly space velocity(GHSV) of 30000 h–1, which was a very promising catalyst for NOx abatement from diesel engine exhaust. The catalysts were characterized by X-ray diffraction(XRD), scanning electron microscopy with energy dispersive X-ray spectroscopy(SEM-EDS), N2 adsorption-desorption(BET) and X-ray photoelectron spectroscopy(XPS). The characterization results showed that the bigger pore radius, higher surface atomic concentration and dispersion of Ce and the abundant adsorbed oxygen on the surface of catalyst contributed to the best NH3-SCR performance of CeO2/TiO2-SiO2-WO3 catalyst containing 10% CeO2.展开更多
Plasmonic nonmetal semiconductors with localized surface plasmon resonance(LSPR)effects possess extended light-response ranges and can act as highly efficient H2 generation photocatalysts.Herein,an LSPR-enhanced 0D/2D...Plasmonic nonmetal semiconductors with localized surface plasmon resonance(LSPR)effects possess extended light-response ranges and can act as highly efficient H2 generation photocatalysts.Herein,an LSPR-enhanced 0D/2D CdS/MoO3‒x heterojunction has been synthesized by the growth of 0D CdS nanoparticles on 2D plasmonic MoO3‒x elliptical nanosheets via a simple coprecipitation method.Taking advantage of the LSPR effect of the MoO3‒x elliptical nanosheets,the light absorption of the CdS/MoO3‒x heterojunction was extended from 600 nm to the near-infrared region(1400 nm).Furthermore,the introduction of 2D plasmonic MoO3‒x elliptical nanosheets not only provided a platform for the growth of CdS nanoparticles,but also contributed to the construction of an LSPR-enhanced S-scheme structure due to the interface between the MoO3‒x and CdS,accelerating the separation of light-induced electrons and holes.Therefore,the CdS/MoO3‒x heterojunction exhibited higher photocatalytic H2 generation activity than pristine CdS under visible light irradiation,including under 420,450,550,and 650 nm monochromic light,as well as improved photo-corrosion performance.展开更多
The crystallization behavior and kinetics of CaO-MgO-Al2O3 SiO2(CMAS) glass with the Fe2O3 content ranging from zero to 5%were investigated by differential scanning calorimetry(DSC).The structure and phase analyse...The crystallization behavior and kinetics of CaO-MgO-Al2O3 SiO2(CMAS) glass with the Fe2O3 content ranging from zero to 5%were investigated by differential scanning calorimetry(DSC).The structure and phase analyses were made by Fourier transform infrared spectroscopy(FT-IR) and X-ray diffraction(XRD).The experiment results show that the endothermic peak temperature about 760℃ is associated with transition and the exothermic peak temperature about 1000℃ is associated with crystallization.The crystallization peak temperature decreases with increasing the Fe203 content.The crystallization mechanism is changed from two-dimensional crystallization to one-dimensional growth,and the intensity of diopside peaks becomes stronger gradually.There is a saltation for the crystallization temperature with the addition of 0.5%Fe2O3 due to the decomposition of Fe2O3.Si-O-Si,O-Si-O and T-O-T(T=Si,Fe,Al) linkages are observed in Fe2O3-CaO-MgO-Al2O3-SiO2 glass.展开更多
Constructing Z-scheme heterojunction to improve the separation efficiency of photogenerated carriers of photocatalysts has gained extensive attention.In this work,we fabricated a novel Z-scheme MoO3/Bi2O4 heterojuncti...Constructing Z-scheme heterojunction to improve the separation efficiency of photogenerated carriers of photocatalysts has gained extensive attention.In this work,we fabricated a novel Z-scheme MoO3/Bi2O4 heterojunction photocatalyst by a hydrothermal method.XPS analysis results indicated that strong interaction between MoO3 and Bi2O4 is generated,which contributes to charge transfer and separation of the photogenerated carriers.This was confirmed by photoluminescence(PL)and electrochemical impedance spectroscopy(EIS)tests.The photocatalytic performance of the as-synthesized photocatalysts was evaluated by degrading rhodamine B(RhB)in aqueous solution under visible light irradiation,showing that 15%MoO3/Bi2O4(15-MB)composite exhibited the highest photocatalytic activity,which is 2 times higher than that of Bi2O4.Besides,the heterojunction photocatalyst can keep good photocatalytic activity and stability after five recycles.Trapping experiments demonstrated that the dominant active radicals in photocatalytic reactions are superoxide radical( O2-)and holes(h+),indicating that the 15-MB composite is a Z-scheme photocatalyst.Finally,the mechanism of the Z-scheme MoO3/Bi2O4 composite for photo-degrading RhB in aqueous solution is proposed.This work provides a promising strategy for designing Bi-based Z-scheme heterojunction photocatalysts for highly efficient removal of environmental pollutants.展开更多
Eu3+-activated Gd2(MoO4)3 pseudo-pompon-like red-emitting phosphors were prepared by solid-state method. The structure, morphology, and luminescent properties of these powder samples were investigated by X-ray diffrac...Eu3+-activated Gd2(MoO4)3 pseudo-pompon-like red-emitting phosphors were prepared by solid-state method. The structure, morphology, and luminescent properties of these powder samples were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), and fluorescent spectrophotometry, respectively. The as-obtained phosphors were single crystalline phase with orthorhombic unit cell. The particles of the powder samples had the length of 5-12 m and width of 3-7 m with flake shape and large surface area, which is suitable for manufacture of white LEDs. The phosphor could be efficiently excited by the incident light of 348-425 nm, well matched with the output wavelength of near-UV (In,Ga)N chip, and re-emitted an intense red light peaking at 615 nm. By combing this phosphor with a ~395 nm-emitting (In,Ga)N chip, a red LED was fabricated, so that the applicability of this novel phosphor to white LEDs was confirmed. It is considered to be an efficient red-emitting conversion phosphor for solid-state lighting based on (In,Ga)N LEDs.展开更多
基金supported by the National Natural Science Foundation of China(21173153)the National High Technology Research and Development Program of China(863 project)(2013AA065304)
摘要A series of catalysts were prepared by doping different loadings of CeO2 over TiO2-SiO2-WO3 and used for the selective catalytic reduction of NOx by NH3. The experimental results showed that the selective catalytic reduction(SCR) performance and SO2-resistant ability of TiO2-SiO2-WO3 were greatly enhanced by the introduction of cerium. The catalyst containing 10% CeO2 showed the highest NO conversion in a wide temperature range and good N2 selectivity with broad operation temperature window at the gas hourly space velocity(GHSV) of 30000 h–1, which was a very promising catalyst for NOx abatement from diesel engine exhaust. The catalysts were characterized by X-ray diffraction(XRD), scanning electron microscopy with energy dispersive X-ray spectroscopy(SEM-EDS), N2 adsorption-desorption(BET) and X-ray photoelectron spectroscopy(XPS). The characterization results showed that the bigger pore radius, higher surface atomic concentration and dispersion of Ce and the abundant adsorbed oxygen on the surface of catalyst contributed to the best NH3-SCR performance of CeO2/TiO2-SiO2-WO3 catalyst containing 10% CeO2.
摘要Plasmonic nonmetal semiconductors with localized surface plasmon resonance(LSPR)effects possess extended light-response ranges and can act as highly efficient H2 generation photocatalysts.Herein,an LSPR-enhanced 0D/2D CdS/MoO3‒x heterojunction has been synthesized by the growth of 0D CdS nanoparticles on 2D plasmonic MoO3‒x elliptical nanosheets via a simple coprecipitation method.Taking advantage of the LSPR effect of the MoO3‒x elliptical nanosheets,the light absorption of the CdS/MoO3‒x heterojunction was extended from 600 nm to the near-infrared region(1400 nm).Furthermore,the introduction of 2D plasmonic MoO3‒x elliptical nanosheets not only provided a platform for the growth of CdS nanoparticles,but also contributed to the construction of an LSPR-enhanced S-scheme structure due to the interface between the MoO3‒x and CdS,accelerating the separation of light-induced electrons and holes.Therefore,the CdS/MoO3‒x heterojunction exhibited higher photocatalytic H2 generation activity than pristine CdS under visible light irradiation,including under 420,450,550,and 650 nm monochromic light,as well as improved photo-corrosion performance.
基金Projects(51264023,51364020,U1202271)supported by the National Natural Science Foundation of ChinaProject(IRT1250)supported by the Program for Innovative Research Team in University of Ministry of Education of ChinaProject(2014HA003)supported by the Science and Technology Leading Talent of Yunnan Province,China
摘要The crystallization behavior and kinetics of CaO-MgO-Al2O3 SiO2(CMAS) glass with the Fe2O3 content ranging from zero to 5%were investigated by differential scanning calorimetry(DSC).The structure and phase analyses were made by Fourier transform infrared spectroscopy(FT-IR) and X-ray diffraction(XRD).The experiment results show that the endothermic peak temperature about 760℃ is associated with transition and the exothermic peak temperature about 1000℃ is associated with crystallization.The crystallization peak temperature decreases with increasing the Fe203 content.The crystallization mechanism is changed from two-dimensional crystallization to one-dimensional growth,and the intensity of diopside peaks becomes stronger gradually.There is a saltation for the crystallization temperature with the addition of 0.5%Fe2O3 due to the decomposition of Fe2O3.Si-O-Si,O-Si-O and T-O-T(T=Si,Fe,Al) linkages are observed in Fe2O3-CaO-MgO-Al2O3-SiO2 glass.
基金supported by the Natural Science Foundation of Hubei Province(2016CFA078)the National Natural Science Foundation of China(51472194)~~
摘要Constructing Z-scheme heterojunction to improve the separation efficiency of photogenerated carriers of photocatalysts has gained extensive attention.In this work,we fabricated a novel Z-scheme MoO3/Bi2O4 heterojunction photocatalyst by a hydrothermal method.XPS analysis results indicated that strong interaction between MoO3 and Bi2O4 is generated,which contributes to charge transfer and separation of the photogenerated carriers.This was confirmed by photoluminescence(PL)and electrochemical impedance spectroscopy(EIS)tests.The photocatalytic performance of the as-synthesized photocatalysts was evaluated by degrading rhodamine B(RhB)in aqueous solution under visible light irradiation,showing that 15%MoO3/Bi2O4(15-MB)composite exhibited the highest photocatalytic activity,which is 2 times higher than that of Bi2O4.Besides,the heterojunction photocatalyst can keep good photocatalytic activity and stability after five recycles.Trapping experiments demonstrated that the dominant active radicals in photocatalytic reactions are superoxide radical( O2-)and holes(h+),indicating that the 15-MB composite is a Z-scheme photocatalyst.Finally,the mechanism of the Z-scheme MoO3/Bi2O4 composite for photo-degrading RhB in aqueous solution is proposed.This work provides a promising strategy for designing Bi-based Z-scheme heterojunction photocatalysts for highly efficient removal of environmental pollutants.
基金Project supported by the Natural Science Research Project of the Jiangsu Higher Education Institutions (08KJD150014)the QingLan Project of the Jiangsu Province (2008)the Basic Research Fund of Jiangsu Teachers University of Technology (KYY09031)
摘要Eu3+-activated Gd2(MoO4)3 pseudo-pompon-like red-emitting phosphors were prepared by solid-state method. The structure, morphology, and luminescent properties of these powder samples were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), and fluorescent spectrophotometry, respectively. The as-obtained phosphors were single crystalline phase with orthorhombic unit cell. The particles of the powder samples had the length of 5-12 m and width of 3-7 m with flake shape and large surface area, which is suitable for manufacture of white LEDs. The phosphor could be efficiently excited by the incident light of 348-425 nm, well matched with the output wavelength of near-UV (In,Ga)N chip, and re-emitted an intense red light peaking at 615 nm. By combing this phosphor with a ~395 nm-emitting (In,Ga)N chip, a red LED was fabricated, so that the applicability of this novel phosphor to white LEDs was confirmed. It is considered to be an efficient red-emitting conversion phosphor for solid-state lighting based on (In,Ga)N LEDs.