Na2O-Al2O3-SiO2 glass-ceramics doped with Er^3+ ions were synthesized by the conventional melt quenching technique at a low melting temperature.The samples were characterized by differential scanning calorimetry(DSC...Na2O-Al2O3-SiO2 glass-ceramics doped with Er^3+ ions were synthesized by the conventional melt quenching technique at a low melting temperature.The samples were characterized by differential scanning calorimetry(DSC),X-ray diffraction(XRD),scanning electron microscopy(SEM),UV-vis-NIR scanning spectrophotometry,and fluorescence spectrometry.The results show that the main crystalline phase of glass-ceramics is nepheline.The best heat-treatment process is at 520 ℃ for 2 h.Because the up-conversion luminescence and near infrared luminescence properties of glass doped with Eu^3+ are studied in detail.展开更多
The sintering characteristics at 1350℃ and leaching property at 80℃ of calcium aluminate clinkers in the CaO-Al2O3-SiO2 (C-A-S) system with different additions of FeO and Fe2O3 were investigated. FeO inhibits the ...The sintering characteristics at 1350℃ and leaching property at 80℃ of calcium aluminate clinkers in the CaO-Al2O3-SiO2 (C-A-S) system with different additions of FeO and Fe2O3 were investigated. FeO inhibits the conversion of β-Ca2SiO4 to γ-Ca2SiO4 and makes the clinker not pulverizable. FeO and Fe2O3 inhibit the formation of CaAl2O4, but promote the formation of Ca12Al14O33. The interplanar spacing at (2 1 1) crystal face of Ca12 Al14O33 in the clinker increases with the increase of FeO addition, which indicates that FeO forms solid solutions in Ca12Al14O33. The clinkers with Fe2O3 addition form a new phase Ca2Fe2O5, and the amount of Ca2Fe2o5 increases with the in crease of Fe2O3 addition. Both FeO and Fe2O3 do not affect the Al2O3 leaching rate of calcium aluminate clinker in sodium carbonate solution, but they increase the molar ratio of caustic Na2O to Al2O3 in the leached liquor.展开更多
The isothermal phase diagram of the Cu2O-Al2O3-SiO2 ternary system at 1150℃ was reported for the samples which were prepared from sol-gel method and quenched by water after being heated at 1150℃ for 12 h. Based on t...The isothermal phase diagram of the Cu2O-Al2O3-SiO2 ternary system at 1150℃ was reported for the samples which were prepared from sol-gel method and quenched by water after being heated at 1150℃ for 12 h. Based on the conventional X-ray powder diffraction (XRD) and in situ high-temperature XRD quantitative analysis,in addition to scanning electron microscopy measurement,the phase identification was achieved. Combining the deduction from the component phase diagrams of the binary systems using the phase equilibrium theorem,the primary isothermal phase diagram was plotted over the composition area Cu2O-mullite-SiO2. In this area,the approximate composition areas of two two-phase regions and one three-phase region,(L2+Cr),(L2+M),and (L1+L2+Tr),were determined. Moreover,the precise composition areas of both of the three-phase regions (L2+Cr+M) and (L2+M+A) were determined according to the results of conventional and in situ high-temperature XRD quantitative analysis by Rietveld method.展开更多
In order to study the relationship between thickness and residual stress in CaO-Al2O3-SiO2 glass-ceramics.The residual stress was measured in CaO-Al2O3-SiO2 system glass-ceramic with different thickness,and the format...In order to study the relationship between thickness and residual stress in CaO-Al2O3-SiO2 glass-ceramics.The residual stress was measured in CaO-Al2O3-SiO2 system glass-ceramic with different thickness,and the formation mechanism and characterization of residual stress in CAS system Glass-ceramic were analyzed by the X-ray diffraction analysis.The experimental results show the compressive residual stress increass with thickness of glass-ceramic increasing.展开更多
The crystallization behavior and kinetics of CaO-MgO-Al2O3 SiO2(CMAS) glass with the Fe2O3 content ranging from zero to 5%were investigated by differential scanning calorimetry(DSC).The structure and phase analyse...The crystallization behavior and kinetics of CaO-MgO-Al2O3 SiO2(CMAS) glass with the Fe2O3 content ranging from zero to 5%were investigated by differential scanning calorimetry(DSC).The structure and phase analyses were made by Fourier transform infrared spectroscopy(FT-IR) and X-ray diffraction(XRD).The experiment results show that the endothermic peak temperature about 760℃ is associated with transition and the exothermic peak temperature about 1000℃ is associated with crystallization.The crystallization peak temperature decreases with increasing the Fe203 content.The crystallization mechanism is changed from two-dimensional crystallization to one-dimensional growth,and the intensity of diopside peaks becomes stronger gradually.There is a saltation for the crystallization temperature with the addition of 0.5%Fe2O3 due to the decomposition of Fe2O3.Si-O-Si,O-Si-O and T-O-T(T=Si,Fe,Al) linkages are observed in Fe2O3-CaO-MgO-Al2O3-SiO2 glass.展开更多
基金Funded by the National High Technology Research and Development Program of China(No.2011AA030204)Key Research Project of Jilin Provincial Science and Technology Department(No.20150204051GX)
摘要Na2O-Al2O3-SiO2 glass-ceramics doped with Er^3+ ions were synthesized by the conventional melt quenching technique at a low melting temperature.The samples were characterized by differential scanning calorimetry(DSC),X-ray diffraction(XRD),scanning electron microscopy(SEM),UV-vis-NIR scanning spectrophotometry,and fluorescence spectrometry.The results show that the main crystalline phase of glass-ceramics is nepheline.The best heat-treatment process is at 520 ℃ for 2 h.Because the up-conversion luminescence and near infrared luminescence properties of glass doped with Eu^3+ are studied in detail.
基金Item Sponsored by National Natural Science Foundation of China(51174054,51104041,51374065)
摘要The sintering characteristics at 1350℃ and leaching property at 80℃ of calcium aluminate clinkers in the CaO-Al2O3-SiO2 (C-A-S) system with different additions of FeO and Fe2O3 were investigated. FeO inhibits the conversion of β-Ca2SiO4 to γ-Ca2SiO4 and makes the clinker not pulverizable. FeO and Fe2O3 inhibit the formation of CaAl2O4, but promote the formation of Ca12Al14O33. The interplanar spacing at (2 1 1) crystal face of Ca12 Al14O33 in the clinker increases with the increase of FeO addition, which indicates that FeO forms solid solutions in Ca12Al14O33. The clinkers with Fe2O3 addition form a new phase Ca2Fe2O5, and the amount of Ca2Fe2o5 increases with the in crease of Fe2O3 addition. Both FeO and Fe2O3 do not affect the Al2O3 leaching rate of calcium aluminate clinker in sodium carbonate solution, but they increase the molar ratio of caustic Na2O to Al2O3 in the leached liquor.
基金the National Natural Science Foundation of China (No. 20471010)the Scien-tific Research Fund of Hunan Provincial Education Department (No. 05c173).
摘要The isothermal phase diagram of the Cu2O-Al2O3-SiO2 ternary system at 1150℃ was reported for the samples which were prepared from sol-gel method and quenched by water after being heated at 1150℃ for 12 h. Based on the conventional X-ray powder diffraction (XRD) and in situ high-temperature XRD quantitative analysis,in addition to scanning electron microscopy measurement,the phase identification was achieved. Combining the deduction from the component phase diagrams of the binary systems using the phase equilibrium theorem,the primary isothermal phase diagram was plotted over the composition area Cu2O-mullite-SiO2. In this area,the approximate composition areas of two two-phase regions and one three-phase region,(L2+Cr),(L2+M),and (L1+L2+Tr),were determined. Moreover,the precise composition areas of both of the three-phase regions (L2+Cr+M) and (L2+M+A) were determined according to the results of conventional and in situ high-temperature XRD quantitative analysis by Rietveld method.
摘要In order to study the relationship between thickness and residual stress in CaO-Al2O3-SiO2 glass-ceramics.The residual stress was measured in CaO-Al2O3-SiO2 system glass-ceramic with different thickness,and the formation mechanism and characterization of residual stress in CAS system Glass-ceramic were analyzed by the X-ray diffraction analysis.The experimental results show the compressive residual stress increass with thickness of glass-ceramic increasing.
基金Projects(51264023,51364020,U1202271)supported by the National Natural Science Foundation of ChinaProject(IRT1250)supported by the Program for Innovative Research Team in University of Ministry of Education of ChinaProject(2014HA003)supported by the Science and Technology Leading Talent of Yunnan Province,China
摘要The crystallization behavior and kinetics of CaO-MgO-Al2O3 SiO2(CMAS) glass with the Fe2O3 content ranging from zero to 5%were investigated by differential scanning calorimetry(DSC).The structure and phase analyses were made by Fourier transform infrared spectroscopy(FT-IR) and X-ray diffraction(XRD).The experiment results show that the endothermic peak temperature about 760℃ is associated with transition and the exothermic peak temperature about 1000℃ is associated with crystallization.The crystallization peak temperature decreases with increasing the Fe203 content.The crystallization mechanism is changed from two-dimensional crystallization to one-dimensional growth,and the intensity of diopside peaks becomes stronger gradually.There is a saltation for the crystallization temperature with the addition of 0.5%Fe2O3 due to the decomposition of Fe2O3.Si-O-Si,O-Si-O and T-O-T(T=Si,Fe,Al) linkages are observed in Fe2O3-CaO-MgO-Al2O3-SiO2 glass.