期刊文献+
共找到180篇文章
< 1 2 9 >
每页显示 20 50 100
Effect of Ce doping into V2O5-WO3/TiO2 catalysts on the selective catalytic reduction of NOx by NH3 认领 引用 被引量:27
1
作者 Mengyin Chen Mengmeng Zhao +3 位作者 Fushun Tang Le Ruan Hongbin Yang Ning Li 《Journal of Rare Earths》 SCIE EI CAS CSCD 2017年第12期1206-1215,共10页
In this work, the effectiveness of V2O5-WO3/TiO2 catalysts modified with different CeO2 contents by impregnation and co-precipitation methods on the selective catalytic reduction of NOxby NH3 have been studied compara... In this work, the effectiveness of V2O5-WO3/TiO2 catalysts modified with different CeO2 contents by impregnation and co-precipitation methods on the selective catalytic reduction of NOxby NH3 have been studied comparatively by various experimental techniques. The results showed that the NO conversion of V2O5-WO3/CeO2-TiO2 catalysts modified by co-precipitation method obviously increased with the Ce doping contents in the studied range below 20%(All Ce contents are in mass fractions), but the NO conversion of V2O5-WO3/CeO2/TiO2 catalysts modified by impregnation methods was lower than V2O5-WO3/CeO2-TiO2 catalysts especially beyond 2.5% Ce doping contents. The V2O5-WO3/CeO2-TiO2 catalysts showed better SCR activity, wider reaction window, and higher sulfur and water resistance. The characterization results elucidated that the modified catalysts by co-precipitation method exhibited higher specific surface area, much better dispersity of Ce component, more Ce^(3+)species and more Br?nsted acid sites than that by impregnation. The vacancies caused by more Ce^(3+)species were favorable for more NO oxidation to NO2, and the interaction between Ce species and WOxspecies generated more Br?nsted acid sites. It could be supposed that dispersed Ce Oxspecies and WOxspecies offered more second active centers respectively to adsorb oxygen and activate ammonia as co-catalysis to the primary active center of V ions, thus facilitated the better SCR activity of modified V2O5-WO3/CeO2-TiO2 catalysts by coprecipitation methods. The co-precipitation methods with Ce component were more suitable for production of modified commercial V2O5-WO3/TiO2 catalysts. 展开更多
关键词 V2O5-WO3/TiO2 catalysts Ce doping methods NH3 selective catalytic reduction NOx Dispersion state Reducibility Br?nsted acid sites
暂未订购 下载PDF
Improving the denitration performance and K-poisoning resistance of the V_2O_5-WO_3/TiO_2 catalyst by Ce4+ and Zr4+ co-doping 认领 引用 被引量:21
2
作者 Jun Cao Xiaojiang Yao +4 位作者 Fumo Yang Li Chen Min Fu Changjin Tang Lin Dong 《Chinese Journal of Catalysis》 SCIE EI CAS CSCD 北大核心 2019年第1期95-104,共10页
A series of V2O5‐WO3/TiO2‐ZrO2,V2O5‐WO3/TiO2‐CeO2,and V2O5‐WO3/TiO2‐CeO2‐ZrO2 catalysts were synthesized to improve the selective catalytic reduction(SCR)performance and the K‐poisoning resistance of a V2O5‐W... A series of V2O5‐WO3/TiO2‐ZrO2,V2O5‐WO3/TiO2‐CeO2,and V2O5‐WO3/TiO2‐CeO2‐ZrO2 catalysts were synthesized to improve the selective catalytic reduction(SCR)performance and the K‐poisoning resistance of a V2O5‐WO3/TiO2 catalyst.The physicochemical properties were investigated by using XRD,BET,NH3‐TPD,H2‐TPR,and XPS,and the catalytic performance and K‐poisoning resistance were evaluated via a NH3‐SCR model reaction.Ce^4+and Zr^4+co‐doping were found to enhance the conversion of NOx,and exhibit the best K‐poisoning resistance owing to the largest BET‐specific surface area,pore volume,and total acid site concentration,as well as the minimal effects on the surface acidity and redox ability from K poisoning.The V2O5‐WO3/TiO2‐CeO2‐ZrO2 catalyst also presents outstanding H2O+SO2 tolerance.Finally,the in situ DRIFTS reveals that the NH3‐SCR reaction over the V2O5‐WO3/TiO2‐CeO2‐ZrO2 catalyst follows an L‐H mechanism,and that K poisoning does not change the reaction mechanism. 展开更多
关键词 V2O5‐WO3/TiO2‐CeO2‐ZrO2 catalyst Co‐doping K‐poisoning NH3‐SCR Reaction mechanism
暂未订购 下载PDF
NH_3 selective catalytic reduction of NO: A large surface TiO_2 support and its promotion of V_2O_5 dispersion on the prepared catalyst 认领 引用 被引量:12
3
作者 刘欣 李俊华 +4 位作者 李想 彭悦 王虎 江晓明 王兰武 《Chinese Journal of Catalysis》 SCIE EI CAS CSCD 北大核心 2016年第6期878-887,共10页
A titania support with a large surface area was developed, which has a BET surface area of 380.5 m^2/g, four times that of a traditional titania support. The support was ultrasonically impregnated with 5 wt% vanadia. ... A titania support with a large surface area was developed, which has a BET surface area of 380.5 m^2/g, four times that of a traditional titania support. The support was ultrasonically impregnated with 5 wt% vanadia. A special heat treatment was used in the calcination to maintain the large surface area and high dispersion of vanadium species. This catalyst was compared to a common V2O5-TiO2 catalyst with the same vanadia loading prepared by a traditional method. The new catalyst has a surface area of 117.7 m^2/g, which was 38% higher than the traditional V2O5-TiO2 catalyst. The selective catalytic reduction(SCR) performance demonstrated that the new catalyst had a wider temperature window and better N2 selectivity compared to the traditional one. The NO conversion was 80% from 200 to 450 °C. The temperature window was 100 °C wider than the traditional catalyst. Raman spectra indicated that the vanadium species formed more V-O-V linkages on the catalyst prepared by the traditional method. The amount of V-O-Ti and V=O was larger for the new catalyst. Temperature programmed desorption of NH3, temperature programmed reduction by H2 and X-ray photoelectron spectroscopy results showed that its redox ability and total acidity were enhanced. The results are helpful for developing a more efficient SCR catalyst for the removal of NOx in flue gases. 展开更多
关键词 V2O5-TiO2 catalyst Denitrification Titania Surface area Dispersibility
暂未订购 下载PDF
Performance of V_2O_5-WO_3-MoO_3/TiO_2 Catalyst for Selective Catalytic Reduction of NO_x by NH_3 认领 引用 被引量:17
4
作者 高岩 栾涛 +2 位作者 吕涛 程凯 徐宏明 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2013年第1期1-7,共7页
The V/O5-WO3-MoOy'TiO2 honeycomb catalyst was prepared with industrial grade chemicals. The structural and physico-chemical properties were analyzed with X-ray diffraction (XRD), scanning electron micrograph (SEM... The V/O5-WO3-MoOy'TiO2 honeycomb catalyst was prepared with industrial grade chemicals. The structural and physico-chemical properties were analyzed with X-ray diffraction (XRD), scanning electron micrograph (SEM) and mercury porosimetry. The NOx conversion and durability were investigated on a pilot plant test set under the actual operational conditions of a coal fired boiler. The catalyst monolith had good formability with mass per- centage of V : W : Mo : TiO2 : fiber glass = 1 : 4.5 : 4.5 : 72 : 18. Vanadium, tungsten and molybdenum species were highly dispersed on anatase TiO2 without causing the transformation of anatase TiO2 to ruffle by calcining under a current of air at 450℃ for 4.5 h, but there were some degrees of crystal distortion. The catalyst particle sizes were almost uniform with close pile-up and the pore structure was regular with complete macro-pore formation and large specific surface area. The NOx conversion was sensitive to temperature but nearly insensitive to NH3. The catalyst showed strong adaptability to NOx concentration with activity above 80% in the range of 615 1640 mg.m-3. Within the range of 720-8640 h continuous operation, the NOx conversion dropped at a rate of about 1% reduction per 600 h. 展开更多
关键词 selective catalytic reduction V2O5-WO3-MoO3/ZiO2 catalyst physico-chemical property flue gas life time
暂未订购 下载PDF
Effects of different introduction methods of Ce^4+and Zr^4+on denitration performance and anti-K poisoning performance of V2O5-WO3/TiO2 catalyst 认领 引用 被引量:11
5
作者 Jun Cao Xiaojiang Yao +3 位作者 Li Chen Keke Kang Min Fu Yang Chen 《Journal of Rare Earths》 SCIE EI CAS CSCD 2020年第11期1207-1214,I0003,共8页
The purpose of this work is to explore the effects of the introduction methods of Ce^4+and Zr^4+on the physicochemical properties,activity,and K tolerance of V2 O5-WO3/TiO2 catalyst for the selective catalytic reducti... The purpose of this work is to explore the effects of the introduction methods of Ce^4+and Zr^4+on the physicochemical properties,activity,and K tolerance of V2 O5-WO3/TiO2 catalyst for the selective catalytic reduction of NOx by NH3.Four different methods,namely pre-impregnation,post-impregnation,coimpregnation,and co-precipitation,were used to synthesize a series of V2 O5-WO3-TiO2-CeO2-ZrO2 catalysts.The catalysts were characterized by XRD,BET,NH3-TPD,XPS,and H2-TPR techniques.Moreover,the activity and anti-K poisoning performance were tested by an NH3-SCR model reaction.The results show that the introduction of Ce^4+and Zr^4+can improve the catalytic performance of V2O5-WO3/TiO2 catalyst,but the impregnation method cannot enhance the anti-K poisoning performance.Ce^4+and Zr^4+introduced by co-precipitation method can effectively improve the tolerance of K,which is mainly due to the incorporation of Ce^4+and Zr^4+into TiO2 lattice to form a uniform TiO2-CeO2-ZrO2 solid solution,resulting in the optimal surface acidity and redox performance,and reducing the decreases caused by Kpoisoning.Furthermore,based on the best introduction method,we further optimized the molar ratio of Ce^4+/Zr^4+,It is found that the catalyst exhibits the best anti-K poisoning performance when the molar ratio of Ce^4+/Zr^4+is 2:1. 展开更多
关键词 V2O5-WO3/TiO2 denitration catalyst Ce^4+,Zr^4+modification Introduction methods Molar ratio Anti-K poisoning performance Rare Earths
暂未订购 下载PDF
Preparation of TiO_2 photocatalyst loaded with V_2O_5 for O_2 evolution 认领 引用 被引量:2
6
作者 高友良 陈启元 +4 位作者 童海霞 胡慧萍 钱东 杨亚辉 周建良 《Journal of Central South University》 SCIE EI CAS 2009年第6期919-925,共7页
TiO2 photocatalysts loaded with V2O5 were prepared via a modified hydrolysis process,and characterized by X-ray diffraction,transmission electron microscopy,Raman spectra and diffuse reflectance UV-Vis spectra measure... TiO2 photocatalysts loaded with V2O5 were prepared via a modified hydrolysis process,and characterized by X-ray diffraction,transmission electron microscopy,Raman spectra and diffuse reflectance UV-Vis spectra measurements. The photocatalytic activity of V2O5/TiO2 was investigated by employing splitting of water for O2 evolution. The results indicate that V2O5 loading can pronouncedly improve the photocatalytic activity of TiO2 with Fe3+ as an electron acceptor under UV or visible light irradiation. The optimum mass fraction of the loaded V2O5 is 8%,and the largest speed of O2 evolution for 8%V2O5 (mass fraction) loaded TiO2 catalyst is 118.2 μmol/(L.h) under UV irradiation,and 83.7 μmol/(L.h) under visible light irradiation. 展开更多
关键词 TiO2 V2O5 photocatalytic activity O2 evolution
暂未订购 下载PDF
K2O对V2O5-WO3/TiO2催化剂的中毒作用 认领 引用 被引量:33
7
作者 朱崇兵 金保升 +3 位作者 仲兆平 李锋 陈玲霞 翟俊霞 《东南大学学报(自然科学版)》 EI CAS 北大核心 2008年第1期101-105,共5页
实验室制备了V2O5-WO3/TiO2的脱硝催化剂,采用模拟中毒法,在此催化剂上负载碱金属氧化物K2O,通过BET,XRD,SEM等方法对微观结构进行表征.在SCR活性试验台上研究不同含量K2O对催化剂脱硝活性,N2O生成率和SO2氧化率的影响.结果发现:K2O对... 实验室制备了V2O5-WO3/TiO2的脱硝催化剂,采用模拟中毒法,在此催化剂上负载碱金属氧化物K2O,通过BET,XRD,SEM等方法对微观结构进行表征.在SCR活性试验台上研究不同含量K2O对催化剂脱硝活性,N2O生成率和SO2氧化率的影响.结果发现:K2O对于催化剂的毒性较强,随着添加量的增大,NO脱除率急剧下降,SO2的氧化率大大提高;较大含量的K2O(nKV=1,摩尔比)使催化剂比表面积有所减少,催化剂颗粒发生轻微团聚,微观结构变化不大,但NO的脱除率小于50%(380℃),N2O的生成率和SO2的氧化率均增加;K2O通过与V2O5的活性酸性位结合,使催化剂中有效活性位数量大为降低,导致脱硝活性下降. 展开更多
关键词 中毒 K2O V2O5-WO3/TiO2催化剂 SCR 脱硝
暂未订购 下载PDF
商业V_2O_5-WO_3/TiO_2催化剂SCR脱硝过程中PM2.5的排放特性及影响因素研究 认领 引用 被引量:31
8
作者 张玉华 束航 +2 位作者 范红梅 张亚平 杨林军 《中国电机工程学报》 EI CSCD 北大核心 2015年第2期383-389,共7页
针对V2O5-WO3/Ti O2商用催化剂,采用电称低压冲击器(ELPI)、PM10/PM2.5采样器、X-射线衍射(XRD)、场发射扫描电镜-能谱分析(FSEM-EDX)等对SCR烟气脱硝中形成的细颗粒粒径分布、形貌、元素及物相组成进行了测试分析,并研究了烟气组分及... 针对V2O5-WO3/Ti O2商用催化剂,采用电称低压冲击器(ELPI)、PM10/PM2.5采样器、X-射线衍射(XRD)、场发射扫描电镜-能谱分析(FSEM-EDX)等对SCR烟气脱硝中形成的细颗粒粒径分布、形貌、元素及物相组成进行了测试分析,并研究了烟气组分及反应条件对SCR脱硝系统出口细颗粒物性的影响。结果表明,SCR脱硝过程中会形成不少亚微米级颗粒,主要成分为硫酸铵以及硫酸氢氨,晶型呈块状。细颗粒生成量随反应温度的升高和NH3/NO摩尔比的增加而增加,在脱硝效率较高时,颗粒物形成量也趋于增多;烟气中SO2、H2O和O2浓度的增加均会导致细颗粒物形成量的增加。导致细颗粒物产生的主要原因可归结于催化剂的活性组分对SO2的氧化以及SCR脱硝反应中NH3的逃逸。 展开更多
关键词 选择性催化还原(SCR) PM2.5 形成 排放特性 影响因素 V2O5-WO3/TiO2
暂未订购 下载PDF
V2O5-WO3/TiO2烟气脱硝催化剂的载体选择 认领 引用 被引量:50
9
作者 朱崇兵 金保升 +2 位作者 仲兆平 李锋 翟俊霞 《中国电机工程学报》 EI 北大核心 2008年第11期41-47,共7页
在选择性催化还原试验台上对4种不同TiO2为载体制备的催化剂的脱硝性能进行测试,采用BET、X射线衍射、傅里叶转换红外光谱、扫描电镜-能谱分析、X射线荧光分析和热重分析等技术进行微观表征,并与商业催化剂进行对比。以硫酸法制备的纳... 在选择性催化还原试验台上对4种不同TiO2为载体制备的催化剂的脱硝性能进行测试,采用BET、X射线衍射、傅里叶转换红外光谱、扫描电镜-能谱分析、X射线荧光分析和热重分析等技术进行微观表征,并与商业催化剂进行对比。以硫酸法制备的纳米级锐钛型TiO2适合作为选择性催化还原催化剂载体,制备的催化剂脱硝效率高,温度窗口宽,选择性好,其中硫酸盐质量分数为8%~10%时最为有利;以氯化法制备纳米TiO2过程中,生成了V3Ti6O17的聚合物导致NO脱除率较低,因此不适合作为催化剂载体。以工业级TiO2为载体制备的催化剂氨氮比为1.0时,在355~420℃的温度范围内NO脱除率为80%~85%,但由于成本很低,因此可以用于脱硝要求不高的场合。由钛酸丁酯溶胶法制备TiO2为载体制备的SCR催化剂性能不及硫酸法制备的纳米级锐钛型TiO2制备的催化剂,且操作复杂,技术难度大,不适宜推广。 展开更多
关键词 V2O5-WO3/TiO2 催化剂载体 选择性催化还原 烟气脱硝 纳米级锐钛型TiO2
暂未订购 下载PDF
Pr掺杂对V2O5-MoO3/TiO2催化剂NH3-SCR反应活性的影响 认领 引用 被引量:33
10
作者 晁晶迪 何洪 +5 位作者 宋丽云 房玉娇 梁全明 张桂臻 邱文革 张然 《高等学校化学学报》 SCIE EI CAS CSCD 北大核心 2015年第3期523-530,共8页
采用溶胶一凝胶法制备了不同Pr掺杂量的Pr6O11-TiO2载体,并以浸渍法制备了V2O5-MoO3/Pr6O11-TiO2催化剂.活性评价结果表明,该催化剂在220~400℃范围内具有良好的脱硝效率和N2选择性以及较强的抗SO2和H2O性能.表征结果表明,掺杂P... 采用溶胶一凝胶法制备了不同Pr掺杂量的Pr6O11-TiO2载体,并以浸渍法制备了V2O5-MoO3/Pr6O11-TiO2催化剂.活性评价结果表明,该催化剂在220~400℃范围内具有良好的脱硝效率和N2选择性以及较强的抗SO2和H2O性能.表征结果表明,掺杂Pr可以提高V2O5-MoO3/TiO2催化剂的比表面积、表面化学吸附氧物种浓度、桥式硝酸盐物种和Brionsted酸位数量,从而提高了催化剂上NHx的选择性催化还原(NH3-SCR)活性。 展开更多
关键词 Pr掺杂 V2O5-MoO3/TiO2催化剂 选择性催化还原 氨气
暂未订购 下载PDF
V_2O_5/TiO_2烟气脱硝催化剂的钾、钠、锌、磷中毒及再生 认领 引用 被引量:24
11
作者 仲兆平 张茜芸 +1 位作者 杨碧源 姚杰 《东南大学学报(自然科学版)》 EI CAS CSCD 北大核心 2013年第3期548-552,共5页
为研究SCR脱硝催化剂的钾、钠、锌、磷中毒,采用K,Na,Zn的氯盐和P的铵盐作为V2O5/TiO2催化剂中毒的前驱体,研究了4种物质对氨法SCR脱硝反应的影响.通过比较水洗、酸洗和氯化铵洗涤3种再生方式,对钾盐中毒的V2O5/TiO2催化剂进行了再生性... 为研究SCR脱硝催化剂的钾、钠、锌、磷中毒,采用K,Na,Zn的氯盐和P的铵盐作为V2O5/TiO2催化剂中毒的前驱体,研究了4种物质对氨法SCR脱硝反应的影响.通过比较水洗、酸洗和氯化铵洗涤3种再生方式,对钾盐中毒的V2O5/TiO2催化剂进行了再生性能研究.最后对于新型抗中毒催化剂的制备进行了探索.实验结果表明:钾盐对于V2O5/TiO2催化剂的毒化作用最强;酸洗具有最佳的再生效果,钾盐中毒的催化剂经酸洗再生后,脱硝活性在一定条件下高于新鲜催化剂;通过添加助剂磷钨酸,V2O5/TiO2催化剂的活性温度窗口得以拓宽,且抗钾盐中毒能力也得到了提高. 展开更多
关键词 选择性催化还原 氮氧化物 V2O5 TiO2催化剂 中毒 再生
暂未订购 下载PDF
钾盐对V_2O_5/TiO_2催化剂NH_3选择性催化还原NO反应的影响 认领 引用 被引量:29
12
作者 姜烨 高翔 +3 位作者 杜学森 毛剑宏 骆仲泱 岑可法 《中国电机工程学报》 EI 北大核心 2008年第35期21-26,共6页
钾在中国燃煤和生物质烟气中以钾盐——硫酸钾和氯化钾的形式存在。文中采用静态N2物理吸附、程序升温表面反应(temperature-programmed surface reaction,TPSR)、傅里叶变换红外(Fourier transform infrared,FT-IR)光谱和催化活性评价... 钾在中国燃煤和生物质烟气中以钾盐——硫酸钾和氯化钾的形式存在。文中采用静态N2物理吸附、程序升温表面反应(temperature-programmed surface reaction,TPSR)、傅里叶变换红外(Fourier transform infrared,FT-IR)光谱和催化活性评价的方法,研究了钾盐对V2O5/TiO2催化剂上NH3选择性催化还原NO反应的影响。结果表明,钾盐使V2O5/TiO2催化剂活性降低。随着钾盐在催化剂上负载量的增加,稳定的NO脱除温度窗口逐渐变窄,当K与V物质的量之比达到3.0时,该窗口消失。钾盐的掺入使催化剂表面活性位数量明显减少,但是并没有显著改变催化剂的反应性。催化剂失活的主要原因是K优先配位在催化剂表面的Br¢nsted酸性位上,中和了Br¢nsted酸性位酸性,使Br¢nsted酸性位上吸附的氨减少。 展开更多
关键词 选择性催化还原 氮氧化物 钾盐 V2O5/TiO2催化剂 活性
暂未订购 下载PDF
蜂窝状V_2O_5-WO_3/TiO_2催化剂脱硝性能研究 认领 引用 被引量:46
13
作者 朱崇兵 金保升 +3 位作者 李锋 仲兆平 翟俊霞 陈玲霞 《中国电机工程学报》 EI 北大核心 2007年第29期45-50,共6页
实验室制备了蜂窝状V2O5-WO3/TiO2的脱硝催化剂,通过BET、XRD、SEM等方法对微观结构进行表征。在自制SCR活性试验台上测试各种运行工况(温度、空速比等)和烟气组成([NH3]/[NO]、水蒸气等)对催化剂的脱硝活性、选择性、SO,的氧... 实验室制备了蜂窝状V2O5-WO3/TiO2的脱硝催化剂,通过BET、XRD、SEM等方法对微观结构进行表征。在自制SCR活性试验台上测试各种运行工况(温度、空速比等)和烟气组成([NH3]/[NO]、水蒸气等)对催化剂的脱硝活性、选择性、SO,的氧化率和氨逃逸量的影响。研究结果表明,自制蜂窝状催化剂在空速比小于3500h^-1、NH3/NO在0.9-1.0、温度320-420℃范围内的NO脱除率较高、SO2氧化率和氨逃逸量较低,基本达到工业应用的要求;低含量(低于2%)水蒸气可以提高高温段NO脱除率,而高含量的水蒸气对催化剂NO脱除具有明显的抑制作用,但水蒸气的加入会使NO脱除温度范围拓宽;由于催化剂自身含有较多的硫酸盐,未观察到SO2对脱硝反应有促进作用。 展开更多
关键词 蜂窝状 V2O5-WO3/TiO2催化剂 选择性催化还原 脱硝
暂未订购 下载PDF
Promotional effect of Si-doped V_2O_5/TiO_2 for selective catalytic reduction of NOx by NH_3 认领 引用 被引量:17
14
作者 Yanxiao Pan Wei Zhao +2 位作者 Qin Zhong Wei Cai Hongyu Li 《Journal of Environmental Sciences》 SCIE EI CAS CSCD 2013年第8期1703-1711,共9页
TiO2 supports doped with different amounts of Si were prepared by a sol-gel method, and 1 wt% vanadia (V2O5) loaded on Si-doped TiO2 was obtained by an impregnation method. The mole ratio of Si/Ti was 0.2, NOx conve... TiO2 supports doped with different amounts of Si were prepared by a sol-gel method, and 1 wt% vanadia (V2O5) loaded on Si-doped TiO2 was obtained by an impregnation method. The mole ratio of Si/Ti was 0.2, NOx conversion exceeds 94% at 300℃ and GHSV of 41,324 hr-1 , which is about 20% higher than pure V2O5/TiO2 . The catalysts were characterized by XRD, BET, TEM, FT-IR, NH3-TPD, XPS, H2-TPR, Raman and in situ DRIFTS. The results of FT-IR and XPS indicated that Si was doped into the TiO2 lattice successfully and a solid solution was obtained. V2O5 active component could be dispersed well on the support with the increasing of surface area of the catalyst, which was confirmed by Raman and XRD results. Above all, the numbers of acid sites (especially the Br nsted-acid) and oxidation properties were enhanced for Si-doped V2O5/TiO2 catalysts, which improved the deNOx catalytic activity. 展开更多
关键词 Si-doped V2O5/TiO2 SCR Si-O-Ti VOx species
暂未订购 下载PDF
V_2O_5-MoO_3/TiO_2催化剂的NOx选择性催化还原及SO_2氧化活性 认领 引用 被引量:12
15
作者 朱繁 何洪 +3 位作者 李坚 吴林彦 杨品 邓志鹏 《工业催化》 CAS 2012年第9期71-76,共6页
采用浸渍法以TiO2为载体制备V2O5-MoO3/TiO2选择性催化还原催化剂,研究V2O5和MoO3负载量对于催化剂选择性催化还原反应及SO2氧化活性的影响,并考察氧含量、氨氮物质的量比和反应空速对3%V2O5-6%MoO3/TiO2催化剂选择性催化还原脱硝活性... 采用浸渍法以TiO2为载体制备V2O5-MoO3/TiO2选择性催化还原催化剂,研究V2O5和MoO3负载量对于催化剂选择性催化还原反应及SO2氧化活性的影响,并考察氧含量、氨氮物质的量比和反应空速对3%V2O5-6%MoO3/TiO2催化剂选择性催化还原脱硝活性的影响。结果表明,随着催化剂中V2O5负载质量分数增加,V2O5-MoO3/TiO2催化剂的选择性催化还原活性和SO2氧化活性均呈上升趋势。MoO3的负载对催化剂的SO2氧化活性有明显抑制作用。MoO3负载质量分数超过9%,制备的催化剂既保持较高的低温选择性催化还原活性,又使选择性催化还原反应中的SO2转化率小于1%。 展开更多
关键词 催化化学 NOx选择性催化还原 V2O5-MoO3/TiO2催化剂 SO2转化
暂未订购 下载PDF
纳米负载型V_2O_5-WO_3/TiO_2催化剂碱中毒及再生研究 认领 引用 被引量:51
16
作者 沈伯雄 熊丽仙 +2 位作者 刘亭 王静 田晓娟 《燃料化学学报》 北大核心 2010年第1期85-90,共6页
实验制备了陶瓷颗粒为骨架的纳米级V2O5-WO3/TiO2(C)催化剂。采用浸渍法模拟碱金属中毒,研究了中毒及再生对催化剂脱硝活性的影响,运用XRD、FT-IR、H2-TPR、XPS技术表征分析了碱金属对催化剂的失活作用。实验表明,碱金属能使催化剂活性... 实验制备了陶瓷颗粒为骨架的纳米级V2O5-WO3/TiO2(C)催化剂。采用浸渍法模拟碱金属中毒,研究了中毒及再生对催化剂脱硝活性的影响,运用XRD、FT-IR、H2-TPR、XPS技术表征分析了碱金属对催化剂的失活作用。实验表明,碱金属能使催化剂活性降低,钾的毒性大于钠。FT-IR结果显示,催化剂以Lewis酸作为活性酸位。H2-TPR、XPS结果表明,钾的加入降低了催化剂的氧化能力,主要影响了催化剂表面的吸附氧。采用单纯的水洗方法并不能提高催化剂活性,而酸洗再生后催化剂在较高反应温度下活性得到较好的恢复。 展开更多
关键词 选择性催化还原 V2O5-WO3/TiO2 脱硝 碱金属 催化剂中毒 再生
暂未订购 下载PDF
V_2O_5/TiO_2-ZrO_2催化剂上甲醇选择氧化制甲缩醛 认领 引用 被引量:11
17
作者 武建兵 王辉 +4 位作者 秦张峰 吴志伟 黄礼春 赵启 王建国 《燃料化学学报》 CSCD 北大核心 2011年第1期64-68,共5页
采用共沉淀法制备TiO2-ZrO2复合氧化物载体、等体积浸渍法制备V2O5/TiO2-ZrO2催化剂,对催化剂在温和条件下甲醇选择氧化生成甲缩醛(DMM)反应进行研究。结果表明,与单一氧化物载体TiO2或ZrO2负载的钒基催化剂相比,V2O5/TiO2-ZrO2对甲... 采用共沉淀法制备TiO2-ZrO2复合氧化物载体、等体积浸渍法制备V2O5/TiO2-ZrO2催化剂,对催化剂在温和条件下甲醇选择氧化生成甲缩醛(DMM)反应进行研究。结果表明,与单一氧化物载体TiO2或ZrO2负载的钒基催化剂相比,V2O5/TiO2-ZrO2对甲醇选择氧化具有较好的催化性能。XRD、NH3-TPD和H2-TPR表明,ZrO2的加入有利于增加催化剂表面的酸性位,并改善钒物种的氧化还原性,使催化剂具有较好的甲醇选择氧化性能。钒的负载量对催化剂表面钒物种的存在形式和颗粒大小有较大的影响,进而影响催化剂的表面酸性和氧化还原性;V2O5质量分数5%~10%的催化剂甲醇氧化性能最好。 展开更多
关键词 甲醇 选择氧化 甲缩醛 V2O5 TiO2 ZrO2
暂未订购 下载PDF
Y改性对V2O5-MoO3/TiO2催化剂脱硝性能的影响 认领 引用 被引量:15
18
作者 黄力 王虎 +3 位作者 纵宇浩 常峥峰 于洋 张鑫 《现代化工》 CAS CSCD 北大核心 2020年第3期162-166,共5页
为提升V2O5-MoO3/TiO2催化剂的脱硝性能,扩展催化剂活性温度窗口,对催化剂进行Y改性处理。采用XRD、N2-吸附脱附、H2-TPR、拉曼光谱、NH3-TPD、XPS等手段对催化剂进行表征。结果表明,添加0.3%的Y可以增加催化剂上聚合钒物种,提高催化剂V... 为提升V2O5-MoO3/TiO2催化剂的脱硝性能,扩展催化剂活性温度窗口,对催化剂进行Y改性处理。采用XRD、N2-吸附脱附、H2-TPR、拉曼光谱、NH3-TPD、XPS等手段对催化剂进行表征。结果表明,添加0.3%的Y可以增加催化剂上聚合钒物种,提高催化剂V4+/V5+、(V4++V3+)/V5+的摩尔比率,同时,还能增加催化剂上化学吸附氧(Oα)的含量。然而,过量的(0.6%、0.9%)Y会导致催化剂还原性能和酸性性能的显著降低,对催化剂的脱硝性能有负面影响。4种催化剂中,VMo Y(0.3)/Ti催化剂的脱硝活性最佳。 展开更多
关键词 SCR 脱硝催化剂 V2O5-MoO3/TiO2
暂未订购 下载PDF
前驱体溶液pH值对V_2O_5-WO_3/TiO_2催化剂的低温NH_3-SCR性能的影响(英文) 认领 引用 被引量:26
19
作者 董国君 张玉凤 +1 位作者 赵元 白洋 《燃料化学学报》 CSCD 北大核心 2014年第12期1455-1463,共9页
采用调节前驱体溶液pH值的方法制备了用于低温NH3-SCR的V2O5-WO3/Ti O2催化剂。通过XPS、Raman光谱、H2-TPR、NH3-TPD、NH3-DRIFT、XRD及物理吸附等手段对催化剂进行了表征分析,并对其脱硝催化活性进行了测试。结果表明,前驱体溶液酸性... 采用调节前驱体溶液pH值的方法制备了用于低温NH3-SCR的V2O5-WO3/Ti O2催化剂。通过XPS、Raman光谱、H2-TPR、NH3-TPD、NH3-DRIFT、XRD及物理吸附等手段对催化剂进行了表征分析,并对其脱硝催化活性进行了测试。结果表明,前驱体溶液酸性的增强能够提高催化剂表面聚合态钒物种和V4+(3+)/V5+的比值以及表面酸性,增加活性位数量、降低反应的活化能、提高其脱硝催化性能。因此,通过提高前驱体溶液的酸性,有助于制备出脱硝活性较好的NH3-SCR催化剂。 展开更多
关键词 前驱体溶液 V2 O5-WO3/TiO2 pH值 低温NH3-SCR 钒物种 脱硝活性
暂未订购 下载PDF
Fe_2O_3对V_2O_5-WO_3/TiO_2催化剂表面性质及其性能的影响 认领 引用 被引量:14
20
作者 刘建华 杨晓博 +3 位作者 张琛 吴凡 李忠 夏启斌 《化工学报》 EI CSCD 北大核心 2016年第4期1287-1293,共7页
催化剂是选择性催化还原(SCR)脱硝技术的核心,研究Fe对钒钛系SCR催化剂脱硝活性及SO_2/SO_3转化率的影响具有重要意义。采用等体积浸渍法制备了不同Fe/V质量比的Fe_2O_3-V2O_5-WO_3/TiO_2催化剂,并进行表征,研究Fe对钒钛系SCR催化剂脱... 催化剂是选择性催化还原(SCR)脱硝技术的核心,研究Fe对钒钛系SCR催化剂脱硝活性及SO_2/SO_3转化率的影响具有重要意义。采用等体积浸渍法制备了不同Fe/V质量比的Fe_2O_3-V2O_5-WO_3/TiO_2催化剂,并进行表征,研究Fe对钒钛系SCR催化剂脱硝活性及SO_2/SO_3转化率的影响,并讨论Fe对于钒钛系SCR催化剂表面性质的影响。结果表明,随着催化剂表面Fe_2O_3含量增加,催化剂的脱硝效率及二氧化硫氧化率均是先上升后下降,当Fe/V质量比为3.0时,催化剂的脱硝效率和二氧化硫氧化率均达到最大值91.78%、1.01%。XPS及H_2-TPR结果表明,随着Fe_2O_3含量增加,催化剂表面钒活性组分的相对含量及V4+/V5+比减小,催化剂表面吸附氧(Oα)浓度增加,催化剂的氧化能力增强。NO-TPD结果表明,随着Fe_2O_3含量增加,催化剂表面吸附NO的能力增强。 展开更多
关键词 V2O5-WO3/TiO2 选择性催化还原 催化剂 载体
暂未订购 下载PDF
上一页 1 2 9 下一页 到第
在线咨询 使用帮助 返回顶部 意见反馈