以φ3 mm Al2O3作为主载体,采用浸渍与焙烧工艺,制备水煤气低温变换催化剂:CuO+ZnO/CeO2/Al2O3.利用X射线衍射(XRD)、扫描电子显微镜(SEM)、Raman散射光谱分别对催化剂的化学组成、表面形貌以及表面元素键合状态进行表征;对催化剂的水...以φ3 mm Al2O3作为主载体,采用浸渍与焙烧工艺,制备水煤气低温变换催化剂:CuO+ZnO/CeO2/Al2O3.利用X射线衍射(XRD)、扫描电子显微镜(SEM)、Raman散射光谱分别对催化剂的化学组成、表面形貌以及表面元素键合状态进行表征;对催化剂的水煤气变换反应(WGSR)活性进行测试.在对催化剂表面形貌进行数据挖掘的基础上,利用复杂网络方法对催化剂的表面形貌进行网络建模,并对其网络拓扑参数和同步性进行了计算.计算结果表明,CuO+ZnO/CeO2/Al2O3表面形貌网络度分布具有幂律分布特征;在催化WGSR以后,催化剂表面形貌网络同步性有所增强.展开更多
采用柠檬酸为络合剂,溶胶-凝胶法制备系列CeO_2-CuO/ZnO/Al_2O_3,在3.0 MPa压力和220~230℃反应条件下,甲苯二胺(TDA)和乙烯催化合成二乙基甲苯二胺(DETDA)为探针反应,考察其催化性能,其中CeO_2掺杂量为3%,催化活性最高。通过X射线衍射(...采用柠檬酸为络合剂,溶胶-凝胶法制备系列CeO_2-CuO/ZnO/Al_2O_3,在3.0 MPa压力和220~230℃反应条件下,甲苯二胺(TDA)和乙烯催化合成二乙基甲苯二胺(DETDA)为探针反应,考察其催化性能,其中CeO_2掺杂量为3%,催化活性最高。通过X射线衍射(XRD)、傅里叶红外光谱(FT-IR)、差热重量分析法(DTG-DTA)、核磁氢谱1 H NMR对CeO_2-CuO/ZnO/Al_2O_3、DETDA、TDA进行检测和表征,揭示了它们的微观结构和内在规律性。XRD检测发现CeO_2掺杂量增多,CeO_2-CuO/ZnO/Al_2O_3衍射峰强度增强,提高了晶化程度,金属原子存在协同效应,增多了活性中心。FT-IR揭示了DETDA内部化学键键型,拥有甲基、亚甲基的多取代芳胺。DTG-DTA检测出的质量变化与热效应两种信息,DETDA的DTG-DTA曲线在66.0、271.0℃存在二个吸热峰,分别为氨基脱离苯环、DETDA的分解产生。通过1 H NMR对DETDA、TDA检测,得到DETDA、TDA的氢原子的数目分别为18和10,分子中各个氢核对应所归属的吸收峰,分别和它们分子式中的氢原子数目吻合。CeO_2-CuO/ZnO/Al_2O_3催化合成DETDA,反应条件温和,工艺流程简单,容易实现高效率和连续化工业生产,因此具有广阔的发展前景。展开更多
The oxidative properties and characterization of CuO, CeO 2 and CuO/CeO 2 cata lysts were examined by means of a CO micro-reactor GC system, TPR, XPS and X-r ay diffraction Rietveld methods. The results show that eith...The oxidative properties and characterization of CuO, CeO 2 and CuO/CeO 2 cata lysts were examined by means of a CO micro-reactor GC system, TPR, XPS and X-r ay diffraction Rietveld methods. The results show that either CuO or CeO 2 ac tivity is quite low for CO oxidation. However, when CuO and CeO 2 are mixed, the oxidative activity of the catalyst increases significantly, probably owing to the valency status of copper species (Cu 2+ and Cu+) on the CeO 2 surfa ce, the dispersion and reducibility. XPS surface analysis shows that CuO loading is very important in forming of either Cu 2+ or Cu+. Rietveld analysis s hows that some CuO, which has smaller ion radius than Ce 4+, enters the Ce O 2 lattice after CuO and CeO 2 are mixed. When the CuO loading reaches 5.0%, the size of CuO crystals is a minimum (6.1 nm) and the micro-strain value i s a maximum (2.86×10 -3), resulting in high surface energy and the best ac tivity for CO oxidation.展开更多
The CuO/CeO2 catalysts were investigated by means of X-ray diffraction (XRD), laser Raman spectroscopy (LRS), X-ray photoelectronic spectroscopy (XPS), temperature-programmed reduction (TPR), in situ Fourier t...The CuO/CeO2 catalysts were investigated by means of X-ray diffraction (XRD), laser Raman spectroscopy (LRS), X-ray photoelectronic spectroscopy (XPS), temperature-programmed reduction (TPR), in situ Fourier transform infrared spectroscopy (FTIR) and NO+CO reaction. The results revealed that the low temperature (〈150℃) catalytic performances were enhanced for CO pretreated samples. During CO pretreatment, the surface Cu+/Cu0 and oxygen vacancies on ceria surface were present. The low va- lence copper species activated the adsorbed CO and surface oxygen vacancies facilitated the NO dissociation. These effects in turn led to higher activities of CuO/CeO2 for NO reduction. The current study provided helpful understandings of active sites and reaction mechanism in NO+CO reaction.展开更多
CeO2 was synthesized via sol-gel process and used as supporter to prepare CuO/CeO2, Cu/CeO2 catalysts by impregnation method. The catalytic properties and characterization of CeO2, CuO/CeO2 and Cu/CeO2 catalysts were ...CeO2 was synthesized via sol-gel process and used as supporter to prepare CuO/CeO2, Cu/CeO2 catalysts by impregnation method. The catalytic properties and characterization of CeO2, CuO/CeO2 and Cu/CeO2 catalysts were examined by means of a microreactor-GC system, HRTEM, XRD, TPR and XPS techniques. The results show that CuO has not catalytic activity and the activity of CeO2 is quite low for CO oxidation. However, the catalytic activity of CuO/CeO2 and Cu/ CeO2 catalysts increases significantly. Furthermore, the activity of CuO/CeO2 is higher than that of Cu/CeO2 catalysts.展开更多
A modified CuO/CeO2 catalyst was prepared by surfactant-assisted impregnation method and showed better catalytic activity for low temperature CO oxidation than that from conventional impregnation method. The physicoch...A modified CuO/CeO2 catalyst was prepared by surfactant-assisted impregnation method and showed better catalytic activity for low temperature CO oxidation than that from conventional impregnation method. The physicochemical properties of different CuO/CeO2 catalysts were characterized by thermogravimetrie and differential scanning calorimetric measurements (TG-DSC), X-ray diffraction (XRD), N2 adsorpti0n-desorption, Raman spectroscopy, H2 temperature-programmed reduction (H2-TPR), tern- perature-programmed desorption of 02 (O2-TPD), and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). The re- sults suggested that the addition of hexadecyl trimethyl ammonium bromide (CTAB) into the impregnation solution could improve the dispersion of CuO species, which could facilitate Cu2+ incorporating into CeO2 lattice and strengthened the synergistic effects between CuO and CeO2, making the lattice oxygen more active, and eventually resulting in enhanced activity for CO oxidation.展开更多
This work described in situ combustion synthesis method for depositing CuO-CeO2 on the FeCrAI honeycomb supports. The influence of the solution concentration and the role of the additive were studied and analyzed by s...This work described in situ combustion synthesis method for depositing CuO-CeO2 on the FeCrAI honeycomb supports. The influence of the solution concentration and the role of the additive were studied and analyzed by scanning electron microscopy (SEM), X-ray diffractometer (XRD), and temperature programmed reduction (TPR) techniques. The results showed that 200 g/L of the active solution was the most appropriate concentration for preparing the monolithic catalysts, and the additives of praseodymium and lanthanum improved the adhesion stability of the monolithic catalysts. The addition of Pr did not greatly affect the catalytic performance, but CO could not be totally converted into CO2 after the addition of La into the CuO-CeO2/Al2O3/FeCrAl catalysts.展开更多
基金National Natural Science Foundation of China(21076206)Natural Basic Research Program of China(973 Program,2010CB732302)National High Technology Research and Development Program(863 Program,2011AA050706)
摘要以φ3 mm Al2O3作为主载体,采用浸渍与焙烧工艺,制备水煤气低温变换催化剂:CuO+ZnO/CeO2/Al2O3.利用X射线衍射(XRD)、扫描电子显微镜(SEM)、Raman散射光谱分别对催化剂的化学组成、表面形貌以及表面元素键合状态进行表征;对催化剂的水煤气变换反应(WGSR)活性进行测试.在对催化剂表面形貌进行数据挖掘的基础上,利用复杂网络方法对催化剂的表面形貌进行网络建模,并对其网络拓扑参数和同步性进行了计算.计算结果表明,CuO+ZnO/CeO2/Al2O3表面形貌网络度分布具有幂律分布特征;在催化WGSR以后,催化剂表面形貌网络同步性有所增强.
摘要采用柠檬酸为络合剂,溶胶-凝胶法制备系列CeO_2-CuO/ZnO/Al_2O_3,在3.0 MPa压力和220~230℃反应条件下,甲苯二胺(TDA)和乙烯催化合成二乙基甲苯二胺(DETDA)为探针反应,考察其催化性能,其中CeO_2掺杂量为3%,催化活性最高。通过X射线衍射(XRD)、傅里叶红外光谱(FT-IR)、差热重量分析法(DTG-DTA)、核磁氢谱1 H NMR对CeO_2-CuO/ZnO/Al_2O_3、DETDA、TDA进行检测和表征,揭示了它们的微观结构和内在规律性。XRD检测发现CeO_2掺杂量增多,CeO_2-CuO/ZnO/Al_2O_3衍射峰强度增强,提高了晶化程度,金属原子存在协同效应,增多了活性中心。FT-IR揭示了DETDA内部化学键键型,拥有甲基、亚甲基的多取代芳胺。DTG-DTA检测出的质量变化与热效应两种信息,DETDA的DTG-DTA曲线在66.0、271.0℃存在二个吸热峰,分别为氨基脱离苯环、DETDA的分解产生。通过1 H NMR对DETDA、TDA检测,得到DETDA、TDA的氢原子的数目分别为18和10,分子中各个氢核对应所归属的吸收峰,分别和它们分子式中的氢原子数目吻合。CeO_2-CuO/ZnO/Al_2O_3催化合成DETDA,反应条件温和,工艺流程简单,容易实现高效率和连续化工业生产,因此具有广阔的发展前景。
摘要The oxidative properties and characterization of CuO, CeO 2 and CuO/CeO 2 cata lysts were examined by means of a CO micro-reactor GC system, TPR, XPS and X-r ay diffraction Rietveld methods. The results show that either CuO or CeO 2 ac tivity is quite low for CO oxidation. However, when CuO and CeO 2 are mixed, the oxidative activity of the catalyst increases significantly, probably owing to the valency status of copper species (Cu 2+ and Cu+) on the CeO 2 surfa ce, the dispersion and reducibility. XPS surface analysis shows that CuO loading is very important in forming of either Cu 2+ or Cu+. Rietveld analysis s hows that some CuO, which has smaller ion radius than Ce 4+, enters the Ce O 2 lattice after CuO and CeO 2 are mixed. When the CuO loading reaches 5.0%, the size of CuO crystals is a minimum (6.1 nm) and the micro-strain value i s a maximum (2.86×10 -3), resulting in high surface energy and the best ac tivity for CO oxidation.
基金supported by National Basic Research Program of China(2010CB732300)National Natural Science Foundation of China(21273110,20973091)Natural Science Foundation for the Youth(21203091)
摘要The CuO/CeO2 catalysts were investigated by means of X-ray diffraction (XRD), laser Raman spectroscopy (LRS), X-ray photoelectronic spectroscopy (XPS), temperature-programmed reduction (TPR), in situ Fourier transform infrared spectroscopy (FTIR) and NO+CO reaction. The results revealed that the low temperature (〈150℃) catalytic performances were enhanced for CO pretreated samples. During CO pretreatment, the surface Cu+/Cu0 and oxygen vacancies on ceria surface were present. The low va- lence copper species activated the adsorbed CO and surface oxygen vacancies facilitated the NO dissociation. These effects in turn led to higher activities of CuO/CeO2 for NO reduction. The current study provided helpful understandings of active sites and reaction mechanism in NO+CO reaction.
基金Projected supported by the National Natural Science Foundation of China (20271028) and Tianjin Natural Science Foundation(033602511)
摘要CeO2 was synthesized via sol-gel process and used as supporter to prepare CuO/CeO2, Cu/CeO2 catalysts by impregnation method. The catalytic properties and characterization of CeO2, CuO/CeO2 and Cu/CeO2 catalysts were examined by means of a microreactor-GC system, HRTEM, XRD, TPR and XPS techniques. The results show that CuO has not catalytic activity and the activity of CeO2 is quite low for CO oxidation. However, the catalytic activity of CuO/CeO2 and Cu/ CeO2 catalysts increases significantly. Furthermore, the activity of CuO/CeO2 is higher than that of Cu/CeO2 catalysts.
基金supported by the National Natural Science Foundation of China(21273150)‘‘Shu Guang’’Project(10GG23)of Shanghai Municipal Education CommissionShanghai Education Development Foundation
摘要A modified CuO/CeO2 catalyst was prepared by surfactant-assisted impregnation method and showed better catalytic activity for low temperature CO oxidation than that from conventional impregnation method. The physicochemical properties of different CuO/CeO2 catalysts were characterized by thermogravimetrie and differential scanning calorimetric measurements (TG-DSC), X-ray diffraction (XRD), N2 adsorpti0n-desorption, Raman spectroscopy, H2 temperature-programmed reduction (H2-TPR), tern- perature-programmed desorption of 02 (O2-TPD), and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). The re- sults suggested that the addition of hexadecyl trimethyl ammonium bromide (CTAB) into the impregnation solution could improve the dispersion of CuO species, which could facilitate Cu2+ incorporating into CeO2 lattice and strengthened the synergistic effects between CuO and CeO2, making the lattice oxygen more active, and eventually resulting in enhanced activity for CO oxidation.
基金Project supported by the National Key Basic Research Program (973 Program,2009CB226112)National Natural Science Foundation of China (21066004)Scientific Research Start Foundation of High-level Introduction Talent of Inner Mongolia University(Grant No.207062) for funding this research
摘要This work described in situ combustion synthesis method for depositing CuO-CeO2 on the FeCrAI honeycomb supports. The influence of the solution concentration and the role of the additive were studied and analyzed by scanning electron microscopy (SEM), X-ray diffractometer (XRD), and temperature programmed reduction (TPR) techniques. The results showed that 200 g/L of the active solution was the most appropriate concentration for preparing the monolithic catalysts, and the additives of praseodymium and lanthanum improved the adhesion stability of the monolithic catalysts. The addition of Pr did not greatly affect the catalytic performance, but CO could not be totally converted into CO2 after the addition of La into the CuO-CeO2/Al2O3/FeCrAl catalysts.