Powder quartz(PQ)ano-TiO2composite was prepared by a mechanochemical method.Based on as-prepared PQano-TiO2composite,we prepared interior paints and investigated the degradation efficiency of formaldehyde(DEF).Scannin...Powder quartz(PQ)ano-TiO2composite was prepared by a mechanochemical method.Based on as-prepared PQano-TiO2composite,we prepared interior paints and investigated the degradation efficiency of formaldehyde(DEF).Scanning electron microscopy showed that nano-TiO2got well dispersed by the adding of PQ.Thermogravimetric analysis indicated that the mass ratio of 4:1 was a relatively good proportion for the most production of PQano-TiO2composite.Fourier transform-infrared spectrometry showed that the peak position of Ti-O-Si bond varied with the milling time.At the early stage,no characteristic peak of Ti-O-Si bond was observed,while at the later stage,new peaks at 902 cm-1and 937 cm-1appeared.Meanwhile,PQano-TiO2composite-based interior paint exhibited significant DEF of 96.3%compared to that consisting of sole nanoTiO2of 92.0%under visible light illumination.As an abundant mineral resource,PQ would make interior paints with HCHO purifying effect much more efficient and cheaper.展开更多
The modification of the traditional interior wall paint was carried out by means of adding nano-TiO2 as a functional pigment. By regulating the dosage of dispersant, the nano-particles can be dispersed in paint homoge...The modification of the traditional interior wall paint was carried out by means of adding nano-TiO2 as a functional pigment. By regulating the dosage of dispersant, the nano-particles can be dispersed in paint homogeneously. With two aspects of experiments: dosage of nano-TiO2 and pigment volume concentration (PVC), the paint formulation can be optimized and its properties~ such as hardness, scrub resistance, storage stability, contrast ratio and gloss can be improved. Finally an interior wall paint with high performance and air purification was prepared. Its character of formaldehyde degradation would be discussed in the next article.展开更多
Cell surface of aquatic organisms constitutes a primary site for the interaction and a barrier for the nano-TiO2 biological effects.In the present study,the biological effects of nano-TiO2 on a unicellular green algae...Cell surface of aquatic organisms constitutes a primary site for the interaction and a barrier for the nano-TiO2 biological effects.In the present study,the biological effects of nano-TiO2 on a unicellular green algae Chlamydomonas reinhardtii were studied by observing the changes of the cell surface morphology and functional groups under UV or natural light.By SEM,the cell surface morphology of C.reinhardtii was changed under UV light,nano-TiO2 with UV light or natural light,which indicated that photocatalysis damaged cell surface.It was also observed that cell surface was surrounded by TiO2 nanoparticles.The ATR-FTIR spectra showed that the peaks of functional groups such as C-N,-C=O,-C-O-C and P=O,which were the important components of cell wall and membrane,were all depressed by the photocatalysis of nano-TiO2 under UV light or natural light.The photocatalysis of nano-TiO2 promoted peroxidation of functional groups on the surface of C.reinhardtii cells,which led to the damages of cell wall and membrane.展开更多
Mn:ZnSe/ZnS/L-Cys core-shell quantum dots(QDs)sensitized La-doped nano-TiO2 thin film(QDSTF)was prepared.X-ray photoelectron spectroscopy(XPS),nanosecond transient photovoltaic(TPV),and steady state surface photovolta...Mn:ZnSe/ZnS/L-Cys core-shell quantum dots(QDs)sensitized La-doped nano-TiO2 thin film(QDSTF)was prepared.X-ray photoelectron spectroscopy(XPS),nanosecond transient photovoltaic(TPV),and steady state surface photovoltaic(SPV)technologies were used for probing the photoelectron behaviors in the Mn-doped QDSTF.The results revealed that the Mn-doped QDSTF had a p-type TPV characteristic.The bottom of the conduction band of the QDs as a sensitizer was just 0.86 eV above that of the La-doped nano-TiO2 thin film,while the acceptor level of the doped Mn2+ions was located at about 0.39 eV below and near the bottom of the conduction band of the QDs.The intensity of the SPV response of the Mn-doped QDSTF at a specific wavelength was ~2.1 times higher than that of the undoped QDSTF.The region of the SPV response of the Mn-doped QDSTF was extended by 191 nm to almost the whole visible region as compared with the undoped QDSTF one.And the region of the TPV response of the Mn-doped QDSTF was also obviously wider than that of the undoped QDSTF.These PV characteristics of the Mn-doped QDSTF may be due to the prolonged lifetime and extended diffusion length of photogenerated free charge carriers injected into the sensitized La-doped nano-TiO2 thin film.展开更多
Nano-TiO2 photocatalytic oxidation was used to perform the advanced treatment of biologically treated chemical comprehensive wastewater. The effects of reaction time,nano-TiO2 dosage and initial p H of the wastewater ...Nano-TiO2 photocatalytic oxidation was used to perform the advanced treatment of biologically treated chemical comprehensive wastewater. The effects of reaction time,nano-TiO2 dosage and initial p H of the wastewater on the removal rate of COD were tested. The GC/MS and EEM techniques were used to qualitatively analyze organic compounds in the wastewater before and after treatment. The result showed that after the biologically treated chemical comprehensive wastewater was treated by nano-TiO2 photocatalytic oxidation under the conditions of reaction time 3 h,nano-TiO2 dosage 8 g/L,and pH 8. 0,the effluent COD was 61. 9 mg/L and its removal rate was 63. 8%. Additionally,the species of organic pollutants reduced from 12 to 6. Meanwhile,the content of humic-like and fulvic-like substances dropped dramatically.展开更多
Based on the sol-gel technique using butyl titanate as oxide precursor, the regenerated SF (silk fibroin)ano-TiO2 composite films were synthesized. Different amounts of butyl titanate to SF were used to verify this ...Based on the sol-gel technique using butyl titanate as oxide precursor, the regenerated SF (silk fibroin)ano-TiO2 composite films were synthesized. Different amounts of butyl titanate to SF were used to verify this effect on the characteristics of the formed materials. Samples were characterized by thermogravimetric analysis, X-ray diffractometry, UV, AFM and FT-IR spectroscopy. The experimental results reveal that, compared to the pure silk fibroin films, the mechanical strength of these regenerated SFano-TiO2 composite films were increased and the dissolubility in water of SFano-TiO2 composite films in aqueous solution were decreased. The diameter of nano-TiO2 particle films was about 80nm through UV and AFM. The nano-TiO2 particles were well dispersed in the regenerated silk fibroin. It was found that the crystal structures of the composite films were transited from typical Silk I to typical Silk H by the XRD and FTIR. Furthermore, the crystallinity of the composite films was obviously improved. Through the TGA, it was demonstrated that the heat transition temperature of composite films was also enhanced.展开更多
The mechanism for tourmaline powder improving the photocatalysis effect of nano-TiO2 was studied by electron-spin resonance (ESR). It is found that the intensity of the signal of hydroxyl free radical produced by the ...The mechanism for tourmaline powder improving the photocatalysis effect of nano-TiO2 was studied by electron-spin resonance (ESR). It is found that the intensity of the signal of hydroxyl free radical produced by the mixture of the tourmaline and nano-TiO2 through 355nm wavelength ultraviolet radiating is increased. Under natural light, the mixture of nano TiO2 and tourmaline powder in a certain weight ratio can improve the effect of decomposing methyl orange that proved that the ESR result was right. The tourmaline particle could promote the photocatalysis of nano-TiO2. This result may be due to the surface electric field of the tourmaline, which can absorb the particle of nano-TiO2 and make the electron inspired by photon transfer from the inner of nano-TiO2 particle to its surface, and even make the electron transfer into tourmaline particle.展开更多
Nano-TiO2 was coated with A12O3,SiO2 and silane coupling agent by chemical liquid deposition.The coating was characterized by Raman spectroscopy,XRD,TEM and FT-IR.The coating content and anti-ultraviolet capacity of n...Nano-TiO2 was coated with A12O3,SiO2 and silane coupling agent by chemical liquid deposition.The coating was characterized by Raman spectroscopy,XRD,TEM and FT-IR.The coating content and anti-ultraviolet capacity of nano-TiO2 were measured by XRF and UV-vis spectrometer.The results show that dense coatings containing 5% Al2O3 or SiO2 can be obtained by mixing slurry at pH 10,adding coating reagent and neutralization reagent into the slurry for 60 min at 85?95 ℃,and finally aging for 120 min.Noncrystal SiO2 was coated on the surface of nano-TiO2 to form silica gel polymer with a Ti—O—Si bond,while aluminum compound exists in the form of AlOOH and part Al(OH)3.The integrated dense film can shield photocatalysis effectively.The inorganic coating film can increase the wettability for xylene and stability in water.The surface modification of nano-TiO2 will not impair its ability for anti-ultraviolet radiation,and more short band ultraviolet radiation can be absorbed.In addition,the optimal coating amount of silane coupling agent should be less than 3% and the best wettability for xylene can be reached when the amount is 1.2%.展开更多
Nano-TiO2 was employed for the separation and preconcentration of thallium.It was found that the adsorption ratio of thallium ions was more than 98%at pH 4.5 and the desorption ratio reached 99%under microwave irradia...Nano-TiO2 was employed for the separation and preconcentration of thallium.It was found that the adsorption ratio of thallium ions was more than 98%at pH 4.5 and the desorption ratio reached 99%under microwave irradiation for 3 min at 350 W.The adsorption equilibrium was well described by the Langmuir isotherm model with a maximum adsorption capacity of 4.09 mg/g[(20±0.1)°C].The nano-TiO2 was successfully applied to the determination of element thallium in the certified reference material polymetallic nodule and water samples.展开更多
A photocatalytic oxidation method for determination of chemical oxygen demand (COD) using nano-TiO2 film, based on the use of a nano-TiO2-Ce(SO4)2 system and electrochemical detection, was proposed. The technique ...A photocatalytic oxidation method for determination of chemical oxygen demand (COD) using nano-TiO2 film, based on the use of a nano-TiO2-Ce(SO4)2 system and electrochemical detection, was proposed. The technique was originated from the direct determination of the Ce(Ⅲ) concentration change resulting from photocatalytic oxidation of organic compounds. Ce(Ⅲ), which was produced by photocatalytic reduction of Ce(SO4)2, could be measured at a multi-walled carbon nanotubes (MWNT) chemically modified electrode (CME). The COD values by this method were calculated from the differential pulse voltammetry (DPV) current of Ce(Ⅲ) at the CME. Under the optimal operation conditions, the detection limit of 0.5 mg·L^-1 COD with the linear range of 1-600 mg·L^-1 was achieved. This method was also applied to determination of various COD of ground water and wastewater samples. The resuits were in good agreement with those from the conventional COD methods, i.e., permanganate and dichromate ones.展开更多
Nano-TiO2 was employed for the adsorption of gallium from aqueous solution in batch equilibrium experiments to investigate its adsorption properties. It was found that the adsorption efficiency of Ga(Ⅲ) was more th...Nano-TiO2 was employed for the adsorption of gallium from aqueous solution in batch equilibrium experiments to investigate its adsorption properties. It was found that the adsorption efficiency of Ga(Ⅲ) was more than 96% at pH 3.0. The adsorption capacities and rates of Ga(Ⅲ) onto nano-TiO2 were evaluated as a function of solution concentration and temperature. The results were analyzed using the Langmuir adsorption isotherms. Adsorption isothermal data could be well interpreted by the Langmuir model. The mean energy of adsorption, 15.81 kJ.mol^-1, was calculated from the D-R adsorption isotherm. The kinetic experimental data properly correlate with the pseudo-second-order kinetic model. The thermodynamic parameters for the process of adsorption have been estimated. The △H and △G values of gallium(Ⅲ) adsorption on nano-TiO2 showed an endothermic and spontaneous nature of adsorption.展开更多
The influences of nano-TiO2 on the setting time, hydration process, hydration products and morphology of sulphoaluminate cement were studied by Vicar apparatus, isothermal calorimetry, X-ray diffraction (XRD), therm...The influences of nano-TiO2 on the setting time, hydration process, hydration products and morphology of sulphoaluminate cement were studied by Vicar apparatus, isothermal calorimetry, X-ray diffraction (XRD), thermal analysis and scanning electron microscopy (SEM). The experimental results show that the incorporation of nano-TiO2 can obviously promote the setting and hardening process of sulphoaluminate cement, and shorten the interval between the initial and final setting time, the hydration induction period of sulphoaluminate cement is significantly shortened and the acceleration period begins immediately, but the hydration exothermic rate at hydration stationary phase is not obviously impacted. The nano-TiO2 additives have influence on the formation rate and degree of crystallinity, but do not affect the type of hydration process. The structure of hydration products is compact at middle age, but their content and microstructure do not change展开更多
The effects of SN5040 and polyethylene glycol(PEG) individually and in combination on the dispersion stability of nano-TiO2 aqueous suspension were investigated by ultraviolet-visible absorption spectroscopy. The ad...The effects of SN5040 and polyethylene glycol(PEG) individually and in combination on the dispersion stability of nano-TiO2 aqueous suspension were investigated by ultraviolet-visible absorption spectroscopy. The adsorption mechanism of these dispersants was detected by zeta potential, isothermal absorption and FTIR analysis. It is found that SN5040 is superior for stabilizing nano-TiO2 in aqueous suspension to PEG in basic region, and the optimum mass fraction of SN5040 addition is 3%. In the case of NaCl addition, the optimum value increases with .the increase of NaCl concentration in the solution. When the mixture of SN5040 and PEG is employed, the antagonism appears preponderant. When SN5040 and PEG are added sequentially, the synergistic reaction takes place. The synergistic reaction can be attributed to the mechanism that PEG adsorption decreases the electronic repulsion between SN5040 molecules, which results in the increase of SN5040 adsorption density. PEG is adsorbed by the interaction with the pre-adsorbed SN5040 layer. Furthermore, the modified inner wall latex paint with well dispersed nano-YiO2 suspension is endowed with excellent ultraviolet absorption and antibacterial properties.展开更多
Nano-TiO2 can remarkably increase lead(Pb)toxicity in aquatic organisms.However,the mechanism of this toxicity,additive or synergistic,is not well understood.To explore this mechanism,we inspected the role of nano-...Nano-TiO2 can remarkably increase lead(Pb)toxicity in aquatic organisms.However,the mechanism of this toxicity,additive or synergistic,is not well understood.To explore this mechanism,we inspected the role of nano-TiO2 in the toxicity of Pb on Ceriodaphnia dubia(C.dubia),a model water flea species typically used for ecotoxicity studies.The effect of algae,a diet for aquatic organisms,on the effect of this binary mixture was also investigated.A two-compartment toxicokinetic(TK)-toxicodynamic(TD)modeling approach was used to quantify the Pb toxicity under these complex conditions and to develop critical parameters for understanding the mechanism of toxicity.This twocompartment modeling approach adequately described the Pb accumulation in the gut and in the rest of the body tissue under different nano-TiO2 concentrations,with and without algae,and predicted the toxicity response of C.dubia.It indicated that increasing the nano-TiO2 concentration reduced the Pb tolerance level and concurrently increased the killing rate constant of C.dubia.Therefore,nano-TiO2 synergistically enhanced Pb toxicity.Algae remarkably reduced the toxicity of this binary mixture through reducing the Pb transfer rate to the body tissue and the killing rate,although it did not affect the Pb tolerance level.This two-compartment modeling approach is useful in understanding the role of nanoparticles when assessing the overall toxicity of nanoparticles and other toxic elements in the environment.展开更多
基金Funded by the National Natural Science Foundation of China(No.41130746)
摘要Powder quartz(PQ)ano-TiO2composite was prepared by a mechanochemical method.Based on as-prepared PQano-TiO2composite,we prepared interior paints and investigated the degradation efficiency of formaldehyde(DEF).Scanning electron microscopy showed that nano-TiO2got well dispersed by the adding of PQ.Thermogravimetric analysis indicated that the mass ratio of 4:1 was a relatively good proportion for the most production of PQano-TiO2composite.Fourier transform-infrared spectrometry showed that the peak position of Ti-O-Si bond varied with the milling time.At the early stage,no characteristic peak of Ti-O-Si bond was observed,while at the later stage,new peaks at 902 cm-1and 937 cm-1appeared.Meanwhile,PQano-TiO2composite-based interior paint exhibited significant DEF of 96.3%compared to that consisting of sole nanoTiO2of 92.0%under visible light illumination.As an abundant mineral resource,PQ would make interior paints with HCHO purifying effect much more efficient and cheaper.
基金Project supported by the Foundation of National Key Technologies Research and Development Program-Shanghai World Expo Special Project (Grant No.04DZ05803)
摘要The modification of the traditional interior wall paint was carried out by means of adding nano-TiO2 as a functional pigment. By regulating the dosage of dispersant, the nano-particles can be dispersed in paint homogeneously. With two aspects of experiments: dosage of nano-TiO2 and pigment volume concentration (PVC), the paint formulation can be optimized and its properties~ such as hardness, scrub resistance, storage stability, contrast ratio and gloss can be improved. Finally an interior wall paint with high performance and air purification was prepared. Its character of formaldehyde degradation would be discussed in the next article.
基金Funded by the National Natural Science Foundation of China(No.51579159)
摘要Cell surface of aquatic organisms constitutes a primary site for the interaction and a barrier for the nano-TiO2 biological effects.In the present study,the biological effects of nano-TiO2 on a unicellular green algae Chlamydomonas reinhardtii were studied by observing the changes of the cell surface morphology and functional groups under UV or natural light.By SEM,the cell surface morphology of C.reinhardtii was changed under UV light,nano-TiO2 with UV light or natural light,which indicated that photocatalysis damaged cell surface.It was also observed that cell surface was surrounded by TiO2 nanoparticles.The ATR-FTIR spectra showed that the peaks of functional groups such as C-N,-C=O,-C-O-C and P=O,which were the important components of cell wall and membrane,were all depressed by the photocatalysis of nano-TiO2 under UV light or natural light.The photocatalysis of nano-TiO2 promoted peroxidation of functional groups on the surface of C.reinhardtii cells,which led to the damages of cell wall and membrane.
基金Project supported by the Natural Science Foundation of Hebei Province,China(Grant No.E2017203029)。
摘要Mn:ZnSe/ZnS/L-Cys core-shell quantum dots(QDs)sensitized La-doped nano-TiO2 thin film(QDSTF)was prepared.X-ray photoelectron spectroscopy(XPS),nanosecond transient photovoltaic(TPV),and steady state surface photovoltaic(SPV)technologies were used for probing the photoelectron behaviors in the Mn-doped QDSTF.The results revealed that the Mn-doped QDSTF had a p-type TPV characteristic.The bottom of the conduction band of the QDs as a sensitizer was just 0.86 eV above that of the La-doped nano-TiO2 thin film,while the acceptor level of the doped Mn2+ions was located at about 0.39 eV below and near the bottom of the conduction band of the QDs.The intensity of the SPV response of the Mn-doped QDSTF at a specific wavelength was ~2.1 times higher than that of the undoped QDSTF.The region of the SPV response of the Mn-doped QDSTF was extended by 191 nm to almost the whole visible region as compared with the undoped QDSTF one.And the region of the TPV response of the Mn-doped QDSTF was also obviously wider than that of the undoped QDSTF.These PV characteristics of the Mn-doped QDSTF may be due to the prolonged lifetime and extended diffusion length of photogenerated free charge carriers injected into the sensitized La-doped nano-TiO2 thin film.
摘要Nano-TiO2 photocatalytic oxidation was used to perform the advanced treatment of biologically treated chemical comprehensive wastewater. The effects of reaction time,nano-TiO2 dosage and initial p H of the wastewater on the removal rate of COD were tested. The GC/MS and EEM techniques were used to qualitatively analyze organic compounds in the wastewater before and after treatment. The result showed that after the biologically treated chemical comprehensive wastewater was treated by nano-TiO2 photocatalytic oxidation under the conditions of reaction time 3 h,nano-TiO2 dosage 8 g/L,and pH 8. 0,the effluent COD was 61. 9 mg/L and its removal rate was 63. 8%. Additionally,the species of organic pollutants reduced from 12 to 6. Meanwhile,the content of humic-like and fulvic-like substances dropped dramatically.
基金National Natural Science Foundation of China(Grant No. 50573068) and Zhejiang Natural Science Foundation of China (Grant No. Y405459).
摘要Based on the sol-gel technique using butyl titanate as oxide precursor, the regenerated SF (silk fibroin)ano-TiO2 composite films were synthesized. Different amounts of butyl titanate to SF were used to verify this effect on the characteristics of the formed materials. Samples were characterized by thermogravimetric analysis, X-ray diffractometry, UV, AFM and FT-IR spectroscopy. The experimental results reveal that, compared to the pure silk fibroin films, the mechanical strength of these regenerated SFano-TiO2 composite films were increased and the dissolubility in water of SFano-TiO2 composite films in aqueous solution were decreased. The diameter of nano-TiO2 particle films was about 80nm through UV and AFM. The nano-TiO2 particles were well dispersed in the regenerated silk fibroin. It was found that the crystal structures of the composite films were transited from typical Silk I to typical Silk H by the XRD and FTIR. Furthermore, the crystallinity of the composite films was obviously improved. Through the TGA, it was demonstrated that the heat transition temperature of composite films was also enhanced.
基金The National Nature Science Foundation of China (50272062) and Beijing City Science Foundation of China(2042021)
摘要The mechanism for tourmaline powder improving the photocatalysis effect of nano-TiO2 was studied by electron-spin resonance (ESR). It is found that the intensity of the signal of hydroxyl free radical produced by the mixture of the tourmaline and nano-TiO2 through 355nm wavelength ultraviolet radiating is increased. Under natural light, the mixture of nano TiO2 and tourmaline powder in a certain weight ratio can improve the effect of decomposing methyl orange that proved that the ESR result was right. The tourmaline particle could promote the photocatalysis of nano-TiO2. This result may be due to the surface electric field of the tourmaline, which can absorb the particle of nano-TiO2 and make the electron inspired by photon transfer from the inner of nano-TiO2 particle to its surface, and even make the electron transfer into tourmaline particle.
基金Project(2002126) supported by the Chongqing Science Committee,China
摘要Nano-TiO2 was coated with A12O3,SiO2 and silane coupling agent by chemical liquid deposition.The coating was characterized by Raman spectroscopy,XRD,TEM and FT-IR.The coating content and anti-ultraviolet capacity of nano-TiO2 were measured by XRF and UV-vis spectrometer.The results show that dense coatings containing 5% Al2O3 or SiO2 can be obtained by mixing slurry at pH 10,adding coating reagent and neutralization reagent into the slurry for 60 min at 85?95 ℃,and finally aging for 120 min.Noncrystal SiO2 was coated on the surface of nano-TiO2 to form silica gel polymer with a Ti—O—Si bond,while aluminum compound exists in the form of AlOOH and part Al(OH)3.The integrated dense film can shield photocatalysis effectively.The inorganic coating film can increase the wettability for xylene and stability in water.The surface modification of nano-TiO2 will not impair its ability for anti-ultraviolet radiation,and more short band ultraviolet radiation can be absorbed.In addition,the optimal coating amount of silane coupling agent should be less than 3% and the best wettability for xylene can be reached when the amount is 1.2%.
基金Supported by the Excellent Talents Project(No.2009R30)Innovation Team Project(No.2007T053)of the Education Department of Liaoning Province,China
摘要Nano-TiO2 was employed for the separation and preconcentration of thallium.It was found that the adsorption ratio of thallium ions was more than 98%at pH 4.5 and the desorption ratio reached 99%under microwave irradiation for 3 min at 350 W.The adsorption equilibrium was well described by the Langmuir isotherm model with a maximum adsorption capacity of 4.09 mg/g[(20±0.1)°C].The nano-TiO2 was successfully applied to the determination of element thallium in the certified reference material polymetallic nodule and water samples.
基金Project supported by the National Natural Science Foundation of China (No. 20327001), the Key Research & Development Program of China (No. 2004BA210A07).
摘要A photocatalytic oxidation method for determination of chemical oxygen demand (COD) using nano-TiO2 film, based on the use of a nano-TiO2-Ce(SO4)2 system and electrochemical detection, was proposed. The technique was originated from the direct determination of the Ce(Ⅲ) concentration change resulting from photocatalytic oxidation of organic compounds. Ce(Ⅲ), which was produced by photocatalytic reduction of Ce(SO4)2, could be measured at a multi-walled carbon nanotubes (MWNT) chemically modified electrode (CME). The COD values by this method were calculated from the differential pulse voltammetry (DPV) current of Ce(Ⅲ) at the CME. Under the optimal operation conditions, the detection limit of 0.5 mg·L^-1 COD with the linear range of 1-600 mg·L^-1 was achieved. This method was also applied to determination of various COD of ground water and wastewater samples. The resuits were in good agreement with those from the conventional COD methods, i.e., permanganate and dichromate ones.
基金supported by the Science Foundation of Education Department of Liaoning Province (Nos. 2007T053)the Natural Science Foundation of Liaoning Province, China (Nos.20082050)
摘要Nano-TiO2 was employed for the adsorption of gallium from aqueous solution in batch equilibrium experiments to investigate its adsorption properties. It was found that the adsorption efficiency of Ga(Ⅲ) was more than 96% at pH 3.0. The adsorption capacities and rates of Ga(Ⅲ) onto nano-TiO2 were evaluated as a function of solution concentration and temperature. The results were analyzed using the Langmuir adsorption isotherms. Adsorption isothermal data could be well interpreted by the Langmuir model. The mean energy of adsorption, 15.81 kJ.mol^-1, was calculated from the D-R adsorption isotherm. The kinetic experimental data properly correlate with the pseudo-second-order kinetic model. The thermodynamic parameters for the process of adsorption have been estimated. The △H and △G values of gallium(Ⅲ) adsorption on nano-TiO2 showed an endothermic and spontaneous nature of adsorption.
基金Funded by the Natural Science Foundation of Hubei Province(No.2014CFB874)the Fundamental Research Funds for the Central Universities(No.2013-YB-25)
摘要The influences of nano-TiO2 on the setting time, hydration process, hydration products and morphology of sulphoaluminate cement were studied by Vicar apparatus, isothermal calorimetry, X-ray diffraction (XRD), thermal analysis and scanning electron microscopy (SEM). The experimental results show that the incorporation of nano-TiO2 can obviously promote the setting and hardening process of sulphoaluminate cement, and shorten the interval between the initial and final setting time, the hydration induction period of sulphoaluminate cement is significantly shortened and the acceleration period begins immediately, but the hydration exothermic rate at hydration stationary phase is not obviously impacted. The nano-TiO2 additives have influence on the formation rate and degree of crystallinity, but do not affect the type of hydration process. The structure of hydration products is compact at middle age, but their content and microstructure do not change
基金Project(04GK2007) supported by Hunan Industrial Key Project of Science and Technology
摘要The effects of SN5040 and polyethylene glycol(PEG) individually and in combination on the dispersion stability of nano-TiO2 aqueous suspension were investigated by ultraviolet-visible absorption spectroscopy. The adsorption mechanism of these dispersants was detected by zeta potential, isothermal absorption and FTIR analysis. It is found that SN5040 is superior for stabilizing nano-TiO2 in aqueous suspension to PEG in basic region, and the optimum mass fraction of SN5040 addition is 3%. In the case of NaCl addition, the optimum value increases with .the increase of NaCl concentration in the solution. When the mixture of SN5040 and PEG is employed, the antagonism appears preponderant. When SN5040 and PEG are added sequentially, the synergistic reaction takes place. The synergistic reaction can be attributed to the mechanism that PEG adsorption decreases the electronic repulsion between SN5040 molecules, which results in the increase of SN5040 adsorption density. PEG is adsorbed by the interaction with the pre-adsorbed SN5040 layer. Furthermore, the modified inner wall latex paint with well dispersed nano-YiO2 suspension is endowed with excellent ultraviolet absorption and antibacterial properties.
摘要Nano-TiO2 can remarkably increase lead(Pb)toxicity in aquatic organisms.However,the mechanism of this toxicity,additive or synergistic,is not well understood.To explore this mechanism,we inspected the role of nano-TiO2 in the toxicity of Pb on Ceriodaphnia dubia(C.dubia),a model water flea species typically used for ecotoxicity studies.The effect of algae,a diet for aquatic organisms,on the effect of this binary mixture was also investigated.A two-compartment toxicokinetic(TK)-toxicodynamic(TD)modeling approach was used to quantify the Pb toxicity under these complex conditions and to develop critical parameters for understanding the mechanism of toxicity.This twocompartment modeling approach adequately described the Pb accumulation in the gut and in the rest of the body tissue under different nano-TiO2 concentrations,with and without algae,and predicted the toxicity response of C.dubia.It indicated that increasing the nano-TiO2 concentration reduced the Pb tolerance level and concurrently increased the killing rate constant of C.dubia.Therefore,nano-TiO2 synergistically enhanced Pb toxicity.Algae remarkably reduced the toxicity of this binary mixture through reducing the Pb transfer rate to the body tissue and the killing rate,although it did not affect the Pb tolerance level.This two-compartment modeling approach is useful in understanding the role of nanoparticles when assessing the overall toxicity of nanoparticles and other toxic elements in the environment.